Bedienungsanleitung Yamaha CVP-403PM (Seite 198 von 226) (Englisch)

593745

198

Zoom out

Zoom in

Vorherige Seite

1/226

Nächste Seite

Using Your Instrument with Other Devices

CVP-405/403/401 Owner’s Manual

198

MIDI Settings

MIDI System Settings

The explanations here apply to the SYSTEM display to

be called up in step 4 of the “Basic Operation” on

page 196.

■ LOCAL CONTROL

Turns the Local Control for each part on or off. When

Local Control is set to “ON,” the keyboard of the instru-

ment controls its own (local) internal tone generator,

allowing the internal voices to be played directly from the

keyboard. If you set Local to “OFF,” the keyboard and

controllers are internally disconnected from the instru-

ment’s tone generator section so that no sound is output

when you play the keyboard or use the controllers. For

example, this allows you to use an external MIDI

sequencer to play the instrument’s internal voices, and

use the instrument keyboard to record notes to the exter-

nal sequencer and/or play an external tone generator.

■ Clock setting, etc.

● CLOCK

Determines whether the instrument is controlled by its

own internal clock or a MIDI clock signal received from

an external device. INTERNAL is the normal Clock setting

when the instrument is being used alone or as a master

keyboard to control external devices. If you are using the

instrument with an external sequencer, MIDI computer,

or other MIDI device, and you want to synchronize it to

that device, set this parameter to the appropriate setting:

MIDI, USB 1, or USB 2. In this case, make sure that the

external device is connected properly (e.g., to the instru-

ment’s MIDI IN terminal), and that it is properly transmit-

ting a MIDI clock signal. When this is set for control by

an external device (MIDI, USB 1 or USB 2), the Tempo is

indicated as “Ext.” in the Main display.

● TRANSMIT CLOCK

Turns MIDI clock (F8) transmission on or off. When set

to OFF, no MIDI clock or Start/Stop data is transmitted

even if a Song or Style is played back.

● RECEIVE TRANSPOSE

Determines whether or not the instrument's transpose

setting (page 58) is applied to the note events received

by the instrument via MIDI.

● START/STOP

Determines whether incoming FA (start) and FC (stop)

messages affect Song or Style playback.

■ MESSAGE SW

● SYS/EX.

The “Tx” setting turns MIDI transmission of MIDI Sys-

tem Exclusive messages on or off. The “Rx” setting turns

MIDI reception and recognition of MIDI System Exclu-

sive messages generated by external equipment on or

off.

● CHORD SYS/EX.

The “Tx” setting turns MIDI transmission of MIDI chord

exclusive data (chord detect. root and type) on or off.

The “Rx” setting turns MIDI reception and recognition

of MIDI chord exclusive data generated by external

equipment on or off.

MIDI Transmit Settings

The explanations here apply to the TRANSMIT display

to be called up in step 4 of the “Basic Operation” on

page 196. This determines which parts will be sent as

MIDI data and over which MIDI channel the data will

be sent.

Operation

Select the part to be transmitted and the channel via

which the selected part will be transmitted. You can also

determine the types of data to be sent.

● With the exception of the two parts below, the

conﬁguration of the parts is the same as those

already explained elsewhere in this manual.

• UPPER

The keyboard part played on the right side of the key-

board from the Split Point for the Voices (RIGHT1 and/

or 2).

• LOWER

The keyboard part played on the left side of the keyboard

from the Split Point for the Voices. This is not affected by

the on/off status of the [ACMP ON/OFF] button.

● Tx MONITOR

The dots corresponding to each channel (1–16) ﬂash

brieﬂy whenever any data is transmitted on the chan-

nel(s).

SYSTEM display

TRANSMIT display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-403PM Seite 198

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-403PM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info