Bedienungsanleitung Yamaha CVP-405PM (Seite 65 von 226) (Englisch)

593776

Zoom out

Zoom in

Vorherige Seite

1/226

Nächste Seite

Basic Operation

Basic Displays (Main Display and File Selection Display)

CVP-405/403/401 Owner’s Manual

Basic Displays (Main Display and File

Selection Display)

There are two basic display types – Main and Selection. Here are explanations of

each display segment and its basic operation.

Main Display

The Main display shows the current basic settings of the instrument such as the cur-

rently selected Voice and Style, allowing you to see them at a single glance. The

Main display is the one you’ll usually see when you play the keyboard.

1 Voice name

• RIGHT 1 (indicated at the right edge):

Voice name currently selected for the RIGHT 1 part (page 80).

• RIGHT 2 (indicated at the right edge):

Voice name currently selected for the RIGHT 2 part (page 80).

• LEFT (indicated at the right edge):

Voice name currently selected for the LEFT part (page 80).

When the Left Hold function is ON, an “H” indication appears (page 85). Pressing one of

the [A]–[C] and [F]–[H] buttons calls up the Voice Selection display for each part (page 32).

On the CVP-401, one of the [A]–[B] and [F]–[I] buttons calls up the Voice Selection display

for each part (page 32).

2 Style name and related information

Displays the currently selected Style name, time signature and tempo. On the CVP-405/

403, pressing the [D] button calls up the Style Selection display (

page 46

). On the CVP-

401, open the Style Selection display by pressing the [1

π†

]–[4

π†

] buttons.

3 Current chord name

If the [ACMP ON/OFF] button is set to On, the chord speciﬁed in the chord section of the

keyboard will be displayed.

4 Song name and related information

Displays the currently selected Song name, time signature and tempo. On the CVP-405/

403, pressing the [I] button calls up the Style Selection display (

page 46

). On the CVP-

401, open the Style Selection display by pressing the [5

π†

]–[8

π†

] buttons.

If the Song contains the chord data, the current chord name will be displayed in the “CHORD”

segment (see 3 above). Pressing the [I] button calls up the Song Selection display (page 35).

5 Registration Memory Bank name

Displays the currently selected Registration Memory Bank name.

Pressing the [J] button calls up the Registration Memory Bank Selection display (page 128).

When the Freeze function is ON, an “F” indication appears (page 129).

6 Volume Balance

Displays the volume balance among the parts. On the CVP-401, open the volume bal-

ance display by pressing the [C] button.

Adjust the volume balance among the parts by using the [1

π†

]–[8

π†

] buttons.

7 Transpose

Displays the amount of transposition in semitone units (page 56).

Returning to the Main display

Here’s a convenient way to

return to the Main display from

any other display: Simply press

the [DIRECT ACCESS] button,

then the [EXIT] button.

78 !)

CVP-405/403 CVP-401

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-405PM Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-405PM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info