Bedienungsanleitung Yamaha CVP-49 (Seite 35 von 56) (Englisch)

593849

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

■ Program Change ON/OFF

Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard or other

MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova will normally also

send a MIDI program change number whenever one of its voices is selected, causing the correspondingly numbered

voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI pro-

gram change numbers.

This function makes it possible to cancel program change number reception and transmission so that voices can be

selected on the Clavinova without affecting the external MIDI device, and vice versa. Program Change is automatically

turned on when the power is initially turned on.

ZHold [MIDI/TRANSPOSE] and press [HARPSI].

XRelease [MIDI/TRANSPOSE].

■ Control Change ON/OFF

Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or key-

board, causing the selected Clavinova voice to be affected by pedal and other “control” settings received from the con-

trolling device. The Clavinova also transmits MIDI control change information when either of its pedals are operated.

This function makes it possible to cancel control change data reception and transmission if you do not want the

Clavinova voices to be affected by control change data received from an external device or vice versa. Control Change is

automatically turned on when the power is initially turned on.

■ Local Control ON/OFF

“Local Control” refers to the fact that, normally, the Clavinova keyboard con-

trols its internal tone generator, allowing the internal voices to be played directly

from the keyboard. This situation is “Local Control ON” since the internal tone

generator is controlled locally by its own keyboard.

Local control can be turned off, however, so that the Clavinova keyboard does

not play the internal voices, but the appropriate MIDI information is still transmit-

ted via the MIDI OUT connector when notes are played on the keyboard. At the

same time, the internal tone generator responds to MIDI information received via

the MIDI IN connector. This means that while an external MIDI sequencer, for

example, plays the Clavinova’s internal voices, an external tone generator can be

played from the Clavinova keyboard. Local Control is automatically turned ON

when the power is initially turned on.

ZHold [MIDI/TRANSPOSE] and press [E. PIANO].

XRelease [MIDI/TRANSPOSE].

ZHold [MIDI/TRANSPOSE] and press [VIBES].

XRelease [MIDI/TRANSPOSE].

= local control OFF.

= local control ON.

MIDI Sequencer

MIDI IN

MIDI OUT

Tone Generator

MIDI OUT

MIDI IN

Played from Clavinova

keyboard.

Clavinova

Local control OFF. Played from MIDI Sequencer.

E.PIANO

= program change reception/

transmission OFF.

= program change reception/

transmission ON.

HARPSI

= control change reception/

transmission OFF.

= control change reception/

transmission ON.

VIBES

MIDI Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-49 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info