Bedienungsanleitung Yamaha CVP-501 (Seite 33 von 104) (Englisch)

593875

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

CVP-509/505/503/501 Reference Manual 33

Styles – Playing Rhythm and Accompaniment –

2 NTR/NTT

NTR (Note Transposition Rule)

NTT (Note Transposition Table)

When NTR is set to ROOT TRANS or ROOT FIXED

[3 ▲▼]/

[4 ▲▼]

NTR (Note

Transposition

Rule)

Determines the relative position of the root note in the chord, when con-

verted from the Source Pattern in response to chord changes. Refer to the

list below.

[5 ▲▼]–

[7 ▲▼]

NTT (Note

Transposition

Table)

Sets the note transposition table for the source pattern. Refer to the list

below.

[8 ▲▼] NTT BASS ON/

OFF

The channel for which this is set to ON will be played back by the bass

root note, when the on-bass chord is recognized by the instrument. When

NTR is set to GUITAR and this parameter is set to ON, only the note

which is assigned to bass will be played back by the bass root note.

ROOT TRANS

(Root Transpose)

When the root note is transposed, the interval

between notes is maintained. For example, the

notes C3, E3 and G3 in the key of C become F3,

A3 and C4 when they are transposed to F. Use this

setting for channels that contain melody lines.

ROOT FIXED The note is kept as close as possible to the previ-

ous note range. For example, the notes C3, E3 and

G3 in the key of C become C3, F3 and A3 when

they are transposed to F. Use this setting for chan-

nels that contain chord parts.

GUITAR This is exclusively for transposing guitar accompaniment. Notes are trans-

posed to approximate the chords played with natural guitar ﬁngering.

BYPASS When NTR is set to ROOT FIXED, the transposition table used does not do

any note conversion. When NTR is set to ROOT TRANS, the table used

only converts the notes by maintaining the pitch relationship between notes.

MELODY Suitable for melody line transposition. Use this for melody channels such

as Phrase 1 and Phrase 2.

CHORD Suitable for chordal parts transposition. Use this for the Chord 1 and Chord

2 channels, especially when they contain piano or guitar-like chordal parts.

MELODIC MINOR

When the played chord changes from a major to a minor chord, this table

lowers the third interval in the scale by a semitone. When the chord changes

from a minor to a major chord, the minor third interval is raised by a

semitone. Other notes are not changed. Use this for melody channels of Sec-

tions which respond only to major/minor chords, such as Intros and Endings.

MELODIC MINOR 5th In addition to the Melodic Minor transposition above, augmented and

diminished chords affect the 5th note of the Source Pattern.

HARMONIC MINOR When the played chord changes from a major to a minor chord, this table

lowers the third and sixth intervals in the scale by a semitone. When the

chord changes from a minor to a major chord, the minor third and ﬂatted

sixth intervals are raised by a semitone. Other notes are not changed. Use

this for chord channels of Sections which respond only to major/minor

chords, such as Intros and Endings.

When playing

a C major

chord.

When playing

an F major

chord.

When playing

a C major

chord.

When playing

an F major

chord.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-501 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info