Bedienungsanleitung Yamaha CVP-501PE (Seite 119 von 138) (Englisch)

594715

119

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

Handling the Floppy Disk Drive (FDD) and Floppy Disks

CVP-509/505/503/501 Owner’s Manual 119

Handling the Floppy Disk Drive

(FDD) and Floppy Disks

(The ﬂoppy disk drive is optional. For instructions on installing the ﬂoppy disk drive, see page 127.)

The ﬂoppy disk drive lets you save original data you’ve created on the instrument to ﬂoppy disk, and allows you to

load data from ﬂoppy disk to the instrument.

Be sure to handle ﬂoppy disks and treat the disk drive with care. Follow the important precautions below.

3.5" 2DD and 2HD type ﬂoppy disks can be used.

If you ﬁnd that you are unable to use new, blank disks or old disks that

have been used with other devices, you may need to format them. For

details on how to format a disk, see page 107. Keep in mind that all data on

the disk will be lost after formatting. Make sure to check beforehand

whether or not the disk contains important data.

NOTE

Floppy disks formatted on this device may or may not be useable as is on other devices.

Inserting a Floppy Disk into the Disk Drive:

Hold the disk so that the label of the disk is facing upward and the sliding

shutter is facing forward, towards the disk slot. Carefully insert the disk

into the slot, slowly pushing it all the way in until it clicks into place and

the eject button pops out.

CAUTION

Never insert anything but ﬂoppy disks into the disk drive. Other objects may cause

damage to the disk drive or ﬂoppy disks.

Removing a Floppy Disk

After checking that the instrument is not accessing* the ﬂoppy disk

(checking that the use lamp on the ﬂoppy disk drive is off), ﬁrmly press the

eject button at the upper right of the disk slot all the way in. When the

ﬂoppy disk is ejected, pull it out of the drive. If the ﬂoppy disk cannot be

removed because it is stuck, do not try to force it, but instead try pressing

the eject button again, or try re-inserting the disk and attempt to eject it

again.

* Access of the disk indicates an active operation, such as recording, play-

back, or deletion of data.

If a ﬂoppy disk is inserted while the power is on, the disk is automatically

accessed, since the instrument checks whether the disk has data.

CAUTION

Do not remove the ﬂoppy disk or turn off the instrument itself while the disk is being

accessed. Doing so may result not only in loss of data on the disk but also damage

to the ﬂoppy disk drive.

Be sure to remove the ﬂoppy disk from the disk drive before turning off the

power. A ﬂoppy disk left in the drive for extended periods can easily pick

up dust and dirt that can cause data-read and -write errors.

• Clean the read/write head regularly. This instrument employs a precision

magnetic read/write head which, after an extended period of use, will

pick up a layer of magnetic particles from the disks used that will eventu-

ally cause read and write errors.

• To maintain the disk drive in optimum working order Yamaha recom-

mends that you use a commercially-available dry-type head cleaning disk

to clean the head about once a month. Ask your Yamaha dealer about the

availability of proper head cleaning disks.

Handle ﬂoppy disks with care, and follow these precau-

tions:

• Do not place heavy objects on a disk or bend or apply pressure to the disk

in any way. Always keep ﬂoppy disks in their protective cases when they

are not in use.

• Do not expose the disk to direct sunlight, extremely high or low tempera-

tures, or excessive humidity, dust or liquids.

• Do not open the sliding shutter and touch the exposed surface of the

ﬂoppy disk inside.

• Do not expose the disk to magnetic ﬁelds, such as those produced by tele-

visions, speakers, motors, etc., since magnetic ﬁelds can partially or

completely erase data on the disk, rendering it unreadable.

• Never use a ﬂoppy disk with a deformed shutter or housing.

• Do not attach anything other than the provided labels to a ﬂoppy disk.

Also make sure that labels are attached in the proper location.

To Protect Your Data (Write-protect Tab):

To prevent accidental erasure of important data, slide the disk’s write-pro-

tect tab to the “protect” position (tab open). When saving data, make sure

that the disk’s write-protect tab is set to the “overwrite” position (tab

closed).

Data Back up

For maximum data security Yamaha recommends that you keep two copies

of important data on separate ﬂoppy disks.

Floppy Disk Compatibility

Formatting a Floppy Disk

Inserting/Removing Floppy Disks

Cleaning the Disk Drive Read/Write Head

About Floppy Disks

Write-protect tab

(locked or write

protected)

Write-protect tab

OFF

(unlocked or write

enabled)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-501PE Seite 119

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-501PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info