Bedienungsanleitung Yamaha CVP-503PE (Seite 85 von 104) (Englisch)

599087

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

CVP-509/505/503/501 Reference Manual 85

Connections – Using Your Instrument with Other Devices –

LEAD GENDER

DEPTH

Adjusts the degree of lead vocal gender change. This is available when the

LEAD GENDER TYPE on page 84 is set to other than Off. The higher the

value, the more “feminine” the harmony voice becomes. The lower the value,

the more “masculine” the voice.

LEAD PITCH COR-

RECT

This parameter is only effective when the LEAD GENDER TYPE on page 84

is set to other than Off. When Smooth or Hard is selected, the pitch of the lead

vocal is shifted in precise semitone steps.

UPPER GENDER

THRESHOLD

Gender change will occur when the harmony pitch reaches or exceeds the spec-

iﬁed number of semitones above the lead vocal pitch.

LOWER GENDER

THRESHOLD

Gender change will occur when the harmony pitch reaches or exceeds the spec-

iﬁed number of semitones below the lead vocal pitch.

UPPER GENDER

DEPTH

Adjusts the degree of gender change applied to harmony notes higher than the

UPPER GENDER THRESHOLD. The higher the value, the more “feminine”

the harmony voice becomes. The lower the value, the more “masculine” the

voice.

LOWER GENDER

DEPTH

Adjusts the degree of gender change applied to harmony notes lower than the

LOWER GENDER THRESHOLD. The higher the value, the more “feminine”

the harmony voice becomes. The lower the value, the more “masculine” the

voice.

VIBRATO DEPTH Sets the depth of vibrato applied to the harmony sound. Also affects the lead

vocal sound when the LEAD GENDER TYPE on page 84 is set to other than

Off.

VIBRATO RATE Sets the speed of the vibrato effect. Also affects the lead vocal sound when the

LEAD GENDER TYPE on page 84 is set to other than Off.

VIBRATO DELAY Speciﬁes the length of the delay before the vibrato effect begins when a note is

produced. Higher values result in a longer delay.

HARMONY 1/2/3

VOLUME

Sets the volume of the ﬁrst (lowest), second, and third (highest) harmony note.

HARMONY 1/2/3 PAN Speciﬁes the stereo (pan) position of the ﬁrst (lowest), second, and third (high-

est) harmony note.

Random

The stereo position of the sound will change randomly whenever the keyboard

is played. This is effective when the Harmony mode (page 81) is set to

“VOCODER” or “CHORDAL.”

L63>R–C–L<R63

A setting of L63>R pans the sound hard left, while C is at center, and L<R63 is

at hard right.

HARMONY 1/2/3

DETUNE

Detunes the ﬁrst (lowest), second, and third (highest) harmony note by the

speciﬁed number of cents.

PITCH TO NOTE When this is set to “ON,” you can “play” the Voices of the instrument with

your voice. (The instrument tracks the pitch of your voice and converts it to

note data for the tone generator. Keep in mind, however, that dynamic changes

in your voice do not affect the volume of the tone generator.)

PITCH TO NOTE

PART

Determines which of the instrument parts will be controlled by the lead vocal

when the PITCH TO NOTE parameter above is “ON.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-503PE Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-503PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info