Bedienungsanleitung Yamaha CVP-505PE (Seite 121 von 138) (Englisch)

599089

121

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

CVP-509/505/503/501 Owner’s Manual 121

Troubleshooting

Voice

The Voice selected from the Voice Selection display does not

sound.

Check whether or not the selected part is turned on (page 39).

A strange “ﬂanging” or “doubling” sound occurs. The sound is

slightly different each time the keys are played.

The RIGHT 1 and RIGHT 2 parts are set to “ON,” and both parts are

set to play the same Voice. Turn off the RIGHT 2 part or change the

Voice of one of the parts.

Some Voices will jump an octave in pitch when played in the upper

or lower registers.

This is normal. Some voices have a pitch limit which, when reached,

causes this type of pitch shift.

Style

The Style does not start even when the [START/STOP] button is

pressed.

The Rhythm channel of the selected Style may not contain any data.

Turn the [ACMP ON/OFF] button on and play left-hand section on the

keyboard to sound the accompaniment part of the Style.

Only the rhythm channel plays. Make sure the Auto Accompaniment function is turned on; press the

[ACMP ON/OFF] button.

You may be playing keys in the right hand range of the keyboard.

Make sure to play keys in the chord range of the keyboard.

Styles in a USB storage device cannot be selected. If the size of the Style data is large (about 120 KB or greater), the

Style cannot be selected because the data is too large to be ready by

the instrument.

Song

Songs cannot be selected. This may be because the language settings have been changed. Set

the appropriate language for the Song ﬁle name (page 17).

If the size of the Song data is large (about 300 KB or greater), the

Song cannot be selected because the data is too large to be read by

the instrument.

Song playback does not start. The Song has been stopped at the end of the Song data. Return to

the beginning of the Song by pressing the SONG [STOP] button.

In the case a Song to which write-protect has been applied (“Prot. 2

Edit” is shown at the upper left of the Song name), the original ﬁle

may not be in the same folder. It cannot be played back unless the

original ﬁle (showing “Prot.2 Orig” at the upper left of the Song name)

is in the same folder.

In case of a Song to which write-protect has been applied (“Prot. 2

Edit” is shown at the upper left of the Song name), the original ﬁle

name may have been changed. Rename the ﬁle with the original ﬁle

name (so that “Prot.2 Orig” is shown at the upper left of the Song

name).

In case of a Song to which write-protect has been applied (“Prot. 2

Edit” is shown at the upper left of the Song name), the ﬁle icon may

have been changed. Songs to which write-protect has been applied

cannot be played back when the ﬁle icon of the original has been

changed.

Song playback stops before the Song is ﬁnished. The Guide function is turned on. (In this case, playback is “waiting” for

the correct key to be played.) Press the [GUIDE] button to turn off the

guide function.

The measure number is different from that of the score in the Song

Position display, shown by pressing the [REW]/[FF] buttons.

This happens when playing back music data for which a speciﬁc, ﬁxed

tempo is set.

When playing back a Song, some channels do not play. Playback of these channels may be set to “OFF.” Turn playback ON for

those channels that are set to “OFF” (page 64).

The Guide lamps do not light during Song playback, even after

pressing the [GUIDE] button.

Any notes outside of the 88-key range cannot be indicated by the

Guide lamps.

The Guide lamps light an octave or two lower/higher than the actual

pitch.

The Guide lamps sometimes light an octave or two lower/higher than

the actual pitch depending on the selected Voice.

The tempo, beat, measure and music notation is not displayed cor-

rectly.

Some Song data for the instrument has been recorded with special

“free tempo” settings. For such Song data, the tempo, beat, measure

and music notation will not be displayed correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-505PE Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-505PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info