Bedienungsanleitung Yamaha CVP-509PM (Seite 91 von 104) (Englisch)

599126

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

CVP-509/505/503/501 Reference Manual 91

Connections – Using Your Instrument with Other Devices –

MIDI System Settings

The explanations here apply to the SYSTEM Page in step 4 on page 89.

Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status by using the [1 ▲▼]–[8

▲▼] buttons.

1 Local Control

Turns the Local Control for each part on or off. When Local Control is set to “ON,” the keyboard of the

instrument controls its own (local) internal tone generator, allowing the internal Voices to be played

directly from the keyboard. If you set Local to “OFF,” the keyboard and controllers are internally

disconnected from the instrument’s tone generator section so that no sound is output when you play the

keyboard or use the controllers. For example, this allows you to use an external MIDI sequencer to play

the instrument’s internal Voices, and use the instrument keyboard to record notes to the external sequencer

and/or play an external tone generator.

2 Clock setting, etc.

■ CLOCK

Determines whether the instrument is controlled by its own internal clock or a MIDI clock signal received

from an external device. INTERNAL is the normal Clock setting when the instrument is being used alone

or as a master keyboard to control external devices. If you are using the instrument with an external

sequencer, MIDI computer, or other MIDI device, and you want to synchronize it to that device, set this

parameter to the appropriate setting: MIDI, USB 1, or USB 2. In this case, make sure that the external

device is connected properly (e.g., to the instrument’s MIDI IN terminal), and that it is properly

transmitting a MIDI clock signal. When this is set for control by an external device (MIDI, USB 1 or USB

2), the Tempo is indicated as “Ext.” in the Main display.

NOTE If the Clock is set other than INTERNAL, the Style or Song cannot be played from the panel buttons.

■ TRANSMIT CLOCK

Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or Start/Stop data is

transmitted even if a Song or Style is played back.

■ RECEIVE TRANSPOSE

Determines whether or not the instrument’s transpose setting is applied to the note events received by the

instrument via MIDI.

■ START/STOP

Determines whether incoming FA (start) and FC (stop) messages affect Song or Style playback.

3 MESSAGE SW (Message Switch)

■ SYS/EX.

The “Tx” setting turns MIDI transmission of MIDI System Exclusive messages on or off. The “Rx” setting

turns MIDI reception and recognition of MIDI System Exclusive messages generated by external

equipment on or off.

■ CHORD SYS/EX.

The “Tx” setting turns MIDI transmission of MIDI chord exclusive data (chord detect. root and type) on or

off. The “Rx” setting turns MIDI reception and recognition of MIDI chord exclusive data generated by

external equipment on or off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-509PM Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-509PM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info