Bedienungsanleitung Yamaha CVP-600 (Seite 3 von 75) (Deutsch)

599130

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

CVP-98/96/600

Messages

● Common Messages

This prompt appears when there is no disk in the disk drive.

➾ Put the proper disk in the drive and attempt the operation again.

When renaming the original song or converting the data this prompt will warn you in the

event that there is no song data.

➾ Select a data-containing song, or insert a disk with song data into the floppy disk

drive.

This message appears if there is no Registration Memory, Micro Tuning, or related data

on the currently inserted disk when you attempt a file-related operation.

➾ Create a file or insert a disk with a proper file.

This message appears when a new disk or a non-Clavinova formatted disk has been

inserted into the disk drive. (See page 106 in the Owner’s Manual.)

➾ Press OK if you want to format the disk. Press CANCEL if you want to abort the

formatting process.

This message appears when you attempt to record or perform other file operations to a

disk whose write-protect tab is set to “write protect.”

➾ Set the write-protect tab to the recordable position (page 7 in the Owner’s

Manual) then try the operation again. If the operation still cannot be performed,

the disk itself has internal write protection, making it impossible to perform record-

ing or file operations on the disk.

This message appears when you attempt to record over parts or perform other operations

on files that are incompatible or do not allow such operations. Depending on the file type,

operations such as additional recording, copying, deleting, etc. may not be possible on

the CVP-98/96/600.

An error occurred while writing to (as in recording or storing files) or reading from the disk.

➾ Try the operation again after pressing the OK button. If the error occurs a second

time, the disk or the disk drive unit may be faulty. If you suspect the drive to be at

fault, refer the problem to your Yamaha dealer.

This appears for a few seconds when a time consuming operation such as format, song

copy, etc. is finished.

This message appears when data is being transfered between the Clavinova and the

disk.

➾ The message disappears automatically when the operation is finished.

When operations such as Song Delete or Format are selected, this prompts you to con-

firm whether you want to go ahead with the operation or not.

➾ Press YES to execute the operation. Press NO to return to the previous display.

The currently loaded disk is full and cannot hold any more data.

➾ Press the OK button, then delete any unnecessary data in the disk (page 138 in

the Owner’s Manual), or use a disk that has more available space. If this appears

during song recording, recording will stop and recorded data up to that point will

be saved automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-600 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info