Bedienungsanleitung Yamaha CVP-600 (Seite 158 von 164) (Englisch)

599130

158

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

156

CVP-98/96/600

Connecting to a Personal Computer

Although the Clavinova can be connected to a personal computer

via the MIDI IN/OUT connectors and a MIDI interface, the TO

HOST connector and HOST SELECT switch allow direct connec-

tion to Apple Macintosh or IBM-PC/AT personal computers for

sequencing and other music applications without the need for a

separate MIDI interface.

■

Connecting to an Apple Macintosh Series Computer

.......

Connect the TO HOST connector of the Clavinova to the modem or printer

port on your Macintosh, depending on which port your MIDI software is using

for MIDI data communication, using a standard Macintosh 8-pin system periph-

eral cable. Set the HOST SELECT switch to the “Mac” position.

You may also have to make other MIDI interface settings on the computer

side, depending on the type of software you use (refer to your software owner’s

manual). In any case the clock speed should be set to 1 MHz.

■ Connecting to an IBM-PC/AT Series Computer ................

Connect the TO HOST connector of the Clavinova to the RS-232C port on your

IBM computer, using a standard 8-pin MINI DIN → 9-pin D-SUB cross cable. Set

the HOST SELECT switch to the “PC-2” position.

Refer to your software owner’s manual for information on any settings you

might have to make on the computer side.

2 (HSK i)1

1 (HSK 0)2

5 (RxD-)3

MINI DIN

8-PIN

4 GND4

3 (TxD-)5

8 (RxD+)6

7 (GP i)7

6 (TxD+)8

MINI DIN

8-PIN

8 (CTS)1

7 (RST)2

2 (RxD)3

4 5 (GND)

3 (TxD) 5

MINI DIN

8-PIN

D-SUB

9-PIN

● “Mac” Cable Connections

• 8-pin system peripheral cable.

• Data transfer rate: 31,250 bps.

● “PC-2” Cable Connections

• 8-pin mini DIN → 9-pin D-SUB cable.

• Data transfer rate: 38,400 bps.

Apple Macintosh

Series Computer

Set to the “Mac”

position.

HOST SELECTTO HOST

MIDIMac

2PC

IBM-PC/AT

Series Computer

Set to the “PC-2”

position.

HOST SELECTTO HOST

MIDIMac

2PC

• When using the [TO HOST]

terminal of the Clavinova, first

turn the power off on both the

Clavinova and the computer

before connecting the cable.

After connecting the cable,

turn the power of the compu-

ter on first, then the

Clavinova.

• When not using the [TO

HOST] terminal of the

Clavinova, make sure the

cable is disconnected from

the [TO HOST] terminal. If

the cable is left connected,

the Clavinova may not func-

tion properly.

• When the HOST SELECT

switch is set to “Mac”, “PC-1”,

or “PC-2, no data transfer

occurs via the MIDI connec-

tors. To use the MIDI connec-

tors for connection via a

standard MIDI interface, set

the HOST SELECT switch to

“MIDI”.

• If your system doesn’t work

properly with the connections

and settings listed above,

your software may require

different settings. Check your

software operation manual

and if it requires a 31,250

bps. data transfer rate, set

the HOST SELECT switch to

“PC-1”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-600 Seite 158

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info