Bedienungsanleitung Yamaha CVP-609 (Seite 81 von 100) (Englisch)

599133

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Song Settings Related to Playback/Recording

CVP-609/605 Reference Manual

*: Version 1.20 or later.

Playing Backing Parts with the Performance Assistant Technology

This feature lets you play your own backing parts on the keyboard along with MIDI Song playback, and have them sound

perfectly appropriate (even though the notes you play might be wrong).

1 Select a MIDI Song containing chord data.

The Performance Assistant Technology is applied only to MIDI Songs containing chord data. To confirm whether

the selected Song contains chord data or not, call up the Home display with the Style area shown then start playback

the Song. If the current Song contains chord data, the current chord type appears in the Style area. After stopping

playback, go to the next step.

2 Call up the operation display via [Menu] → [SongSetting] → [Play].

3 Set the Performance Assistant to “On.”

NOTE Selecting a Song will turn off the Performance Assistant.

4 Press the SONG CONTROL [ / ] (PLAY/PAUSE) button to start playback.

5 Play the keyboard.

Along with MIDI Song playback, try playing the bass line with the left hand area while playing various phrases or

chords with the right hand area. Even if you do not know what notes should be played, don’t worry and play any

keys as desired! Only the harmonically “correct” notes matching the current chord are sounded, regardless of the

notes you actually play.

6 Press the SONG CONTROL [ ](STOP) button to stop playback.

Re-Recording a Specific Section of the MIDI Song — Punch In/Out

When re-recording a specific section of an already-recorded MIDI Song, use the Punch In/Out function. In this method,

only the data between the Punch In point and the Punch Out point is overwritten with the newly recorded data. Keep in

mind that the notes before and after the Punch In/Out points are not recorded over, although you will hear them play

back normally to guide you in the Punch In/Out timing.

1 Call up the operation display via [Menu] → [SongSetting] → [Rec] → Page 1/2.

2 Set the parameters such as how the Recording starts/stops and Punch In/Out position.

NOTE The parameters here cannot be set while recording.

Chord Detection

Priority (*)

Determines the priority of the chords for accompaniment, either the ones contained in the

MIDI Song being played back or the chord you’ve just played in the chord section of the

keyboard.

•MIDI Song:

Gives priority to the chords contained in the MIDI Song.

•Keyboard: Gives priority to the chords you play in the chord section of the keyboard. Set this if

you want to practice playing chords with MIDI Song playback. Once you play in the chord

section during MIDI song playback, the instrument ignores the chords contained in the MIDI

Song until the playback ends.

Rec

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-609 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-609

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info