Bedienungsanleitung Yamaha CVP-609GP (Seite 51 von 100) (Englisch)

599134

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Creating/Editing Styles (Style Creator)

CVP-609/605 Reference Manual

 Record a phrase in CM7 which will play appropriate notes as change chords during

performance

Rules when recording a Main or Fill-in

With the default initial settings, the Source Root/Chord is set to CM7. This means that you should record a Source

Pattern which is to be triggered by specifying CM7 during normal performance. Record a bass line, phrase or chord

backing which you want to hear when CM7 is specified. More concretely, see below.

• Use only the CM7 scale tones when recording the Bass and Phrase channels (i.e., C, D, E, G, A, and B).

• Use only the chord tones when recording the Chord and Pad channels (i.e., C, E, G, and B).

If you observe this rule, Style playback notes are appropriately converted depending on the chord changes you make

during your performance.

Rules when recording an Intro or Ending

These Sections are designed assuming that the chord is not changed during playback. This is why you need not

observe the rule for Main and Fill-In Sections described above, and you can make the chord progression in

recording. However, follow the rule below since the Source Root/Chord is set to CM7.

• When recording the Intro, make sure that the recorded phrase should lead to CM7 scale music.

• When recording the Ending, make sure that CM7 scale music should lead to the recorded phrase.

 Setting the Source Root/Chord if necessary

Although the default Source Root/Chord is set to CM7 as described above, you can change this to your favorite one

which lets you play easily. Call up the “SFF Edit” display, set the Source Root and Chord to the favorite or desired

Root and Chord type. Keep in mind that when you change the Source Chord from the default CM7 to another

chord, the chord notes and recommended notes will also change. For details, refer to page 56.

3 Press the STYLE CONTROL [ / ](START/STOP) button to start recording.

With the already recorded data playing back, turn each channel on or off by touching as desired.

If necessary, delete a channel by touching [Delete] located under the desired channel.

4 As soon as loop playback returns to the first beat in the first measure, start playing the bass

line, chord backing or phrase to be recorded.

5 Press the [ / ](START/STOP) button to stop playback.

If you want to add more notes, press the [ / ](START/STOP) button again to continue recording.

 To hear the playback sound of the already recorded channels with another Source Chord/

Root:

1) Call up the “SFF Edit” display, then set the “Target Ch” at the top of the display to “Rhythm1” or “Rhythm2.”

2) Touch [Play Root/Chord] to call up the operation display.

3) Press the STYLE CONTROL [ / ](START/STOP) button to start playback.

4) On the display, set the “Play Root/Chord” to the desired Chord root and Chord type.

This operation lets you hear how the Source Pattern is played back via the chord change during normal

performance.

6 Touch and hold the Recording channel for a while (until the button changes color) to exit

from the Recording mode.

Available Voices for recording

Any except for the Organ Flutes/Drum kit/SFX kit Voices can be used for recording.

C R C C R C

C = Chord note

C, R = Recommended note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-609GP Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-609GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info