Bedienungsanleitung Yamaha CVP-609GP (Seite 80 von 100) (Englisch)

599134

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Song Settings Related to Playback/Recording

CVP-609/605 Reference Manual

Part Ch

Right

Determines which channel is assigned to the right-hand part.

Left

Determines which channel is assigned to the left-hand part.

Auto Set

When set to “On,” this automatically sets the proper MIDI channels for the right- and left hand parts

pre-programmed in the commercially available Song data. Normally, this should be set to “On.”

Lyrics

Language

Determines the language of the displayed lyrics.

•Auto:

When the language is specified in the Song data, the lyrics are displayed accordingly. When the

language is not specified in the Song data, the lyrics language is regarded as “International” below.

•International: Handles the displayed lyrics as a western language.

• Japanese: Handles the displayed lyrics as Japanese.

Play

Repeat Mode

Determines how playback of the current MIDI Song or Audio Song is repeated.

•Off:

Plays through the selected Song, then stops.

•Single: Plays through the selected Song repeatedly.

•All: Continues playback through all the Songs in the specified folder repeatedly.

•Random: Continues playback at random through all the Songs in the specified folder

repeatedly.

NOTE The preset Songs in the “Follow Lights” folder contain the Guide settings. These Songs are

inappropriate for use with All” or Random repeat.

Phrase Mark

Repeat

Phrase Mark is a pre-programmed part of some Song data, which specifies a certain location

(set of measures) in the Song. When this is “On,” the section corresponding to the specified

Phrase Mark number is repeatedly played back. This parameter is available only when the

MIDI Song containing Phrase Mark settings is selected.

Quick Start

On some commercially available MIDI Song data, certain settings related to the MIDI Song

(such as Voice selection, volume, etc.) are recorded to the first measure, before the actual note

data. When Quick Start is set to “On,” the instrument reads all initial non-note data of the

Song at the highest possible speed, then automatically switches to the appropriate tempo at

the first note. This allows you to start playback as quickly as possible, with a minimum pause

for reading of data.

MIDI Song Fast

Forward Type (*)

Determines the fast forward type of when pressing [ ] during MIDI Song playback.

•Jump:

Pressing [ ] once instantly sets the playback position to the next measure without

sounding. Holding [ ] scrolls forward continuously.

•Scrub: Pressing and holding [ ] plays and sounds the MIDI Song at high speed.

USB MIDI Song

Auto Open

When this is set to “On,” connecting the USB flash memory will call up the first MIDI Song in

the USB flash memory.

Performance

Assistant

Refer to page 81.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-609GP Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-609GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info