Bedienungsanleitung Yamaha CVP-609GP (Seite 98 von 117) (Englisch)

599134

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

CVP-609/605 Owner’s Manual

CVP-609 Assembly

Attach unit G using two screws for the cover (4 x 10 mm).

8 Plug the power cord into the power

connector.

For models that feature a voltage selector:

Set the voltage selector to an appropriate voltage.

9 Rotate the adjuster until it comes in firm

contact with the floor surface.

10Attach the headphone hanger.

Attach the headphone hanger using two thin screws (4 x

10 mm) as shown in the illustration.

Voltage Selector

Before connecting the AC power cord, check the setting of the

voltage selector which is provided in some areas. To set the selector

for 110V, 127V, 220V or 240V main voltages, use a “minus”

screwdriver to rotate the selector dial so that the correct voltage for

your region appears next to the pointer on the panel. The voltage

selector is set at 240V when the unit is initially shipped. After the

proper voltage has been selected, connect the AC power cord to the

AC IN jack and an AC wall outlet. A plug adaptor may be also

provided in some areas to match the pin configuration of the AC

wall outlets in your area.

WARNING

An improper voltage setting can cause serious damage to

the instrument or result in improper operation.

Pass the pedal

cord between

units D and E.

Align the pedal cord into the

groove on unit D, then install

the cover onto the groove

correctly.

Correct

Incorrect

After completing the assembly, please check the following.

•Are there any parts left over?

→ Review the assembly procedure and correct any errors.

• Is the Clavinova clear of doors and other movable

fixtures?

→ Move the Clavinova to an appropriate location.

• Does the Clavinova make a rattling noise when you

shake it?

→ Tighten all screws.

• Does the pedal box rattle or give way when you step on

the pedals?

→ Turn the adjuster so that it is set firmly against the floor.

• Are the pedal and power cords inserted securely into

the sockets?

CAUTION

When moving the instrument, always hold the bottom of the

main unit. Do not hold the key cover or top portion. Improper

handling can result in damage to the instrument or personal

injury.

Transp orting

If you move to another location, you can transport the instrument

along with other belongings. You can move the unit as it is

(assembled) or you can disassemble the unit down to the condition

it was in when you first took it out of the box. Transport the

keyboard horizontally. Do not lean it up against a wall or stand it up

on its side. Do not subject the instrument to excessive vibration or

shock. When transporting the assembled instrument, make sure all

screws are properly tightened and have not been loosened by

moving the instrument.

CAUTION

If the unit creaks or is otherwise unsteady when you play on

the keyboard, refer to the assembly diagrams and retighten

all screws.

Hold here.

Do not hold here.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-609GP Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-609GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info