Bedienungsanleitung Yamaha CVP-609GP (Seite 102 von 117) (Englisch)

599134

102

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

CVP-609/605 Owner’s Manual102

Troubleshooting

Overall

A click or pop is heard when the power is

turned on or off.

Electrical current is being applied to the instrument. This is normal.

The power is automatically turned off. This is normal and due to the Auto Power Off function. If necessary, set the

parameter of the Auto Power Off function (page 15).

Noise is heard from the instrument’s

speakers.

Noise may be heard if a mobile phone is used near the instrument or if the

phone is ringing. Turn off the mobile phone, or use it further away from the

instrument.

In the LCD, there are some specific points

that are always lit or unlit.

These are the result of defective pixels and occasionally occur in TFT-

LCDs; they do not indicate a problem in operation.

Noise is heard from the instrument’s

speakers or headphones when using the

instrument with the application on iPhone/

iPad.

When you use the instrument along with the application on your iPhone/

iPad, we recommend that you set “Airplane Mode” to “ON” on your

iPhone/iPad in order to avoid noise caused by communication.

Mechanical noise is heard during

performance.

The keyboard mechanism of this instrument simulates the keyboard

mechanism of an actual piano. Mechanical noise is also heard on a piano.

There is a slight difference in sound quality

among different notes played on the

keyboard.

This is normal and is a result of the instrument’s sampling system.

Some Voices have a looping sound.

Some noise or vibrato is noticeable at higher

pitches, depending upon the Voice.

The overall volume is too low or no sound is

heard.

The master volume may be set too low. Set it to an appropriate level with

the [MASTER VOLUME] dial.

All keyboard parts are set to off. On the Home display, touch [Main]/

[Layer]/[Left] to turn on the part (page 42).

The volume of the individual parts may be set too low. Raise the volume in

the Balance display (page 38).

Make sure the desired channel is set to on (page 83).

Headphones are connected, disabling the speaker output. Unplug the

headphones.

Make sure that the “Speaker” is set to “On” from [Menu]  [Utility] 

[Speaker/Connectivity].

The sound is distorted or noisy. The volume may be turned up too high. Make sure all relevant volume

settings are appropriate.

This may be caused by certain effects or filter resonance settings. Check

the effect or filter settings and change them accordingly in the Mixer

display, referring to the Reference Manual on the website.

Not all simultaneously played notes sound. You are probably exceeding the maximum polyphony (page 106) of the

instrument. When the maximum polyphony is exceeded, the earliest

played notes will stop sounding, letting the latest played notes sound.

The keyboard volume is lower than the Song/

Style playback volume.

The volume of the keyboard parts may be set too low. Raise the keyboard

volume (Main/Layer/Left), or lower the Song/Style volume in the Balance

display (page 38).

Some characters of the file/folder name are

garbled.

The language settings have been changed. Set the appropriate language

for the file/folder name (page 16).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-609GP Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-609GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info