Bedienungsanleitung Yamaha CVP-69 (Seite 105 von 163) (Englisch)

599136

105

Zoom out

Zoom in

Vorherige Seite

1/163

Nächste Seite

102

The Utility Functions

XSelect the Song Number to be Converted.............................

Use the SONG LCD button — or data dial or [+]/[–] buttons — to

select the song number to be converted.

CStart the Conversion .....................................................................................

Press the TRANSFORM LCD button to begin the conversion process.

When the conversion process is finished, the “Completed! SONG

No. XX” message will appear to inform you as to the SONG No. into

which the data was saved.

ZInsert a Disk, Select the Song Copy Function, &

Select the Type of Copy Operation ...............................................

Insert the disk containing the song you want to copy, select the Song

Copy function, and use either of the first two LCD buttons to select

“DISK1 — 1” to copy to a different song within the same disk, or

“DISK1 — 2” to copy to a different disk.

XSelect the Source Song Number .....................................................

Use the SONG—

LCD button to select the song you want to copy.

The data dial and [+]/[–] buttons can also be used once the SONG—

pa-

rameter has been selected. The selected song name will appear in the

upper right corner of the display.

CSelect the Destination Song (DISK 1 – 1 type copy)..

This step is for the DISK 1 – 1 type copy only. If you have selected the DISK 1 –

2 type copy, pass this step and proceed to the next

V step.

Use the SONG button to select the song number you wish to copy to

(i.e. the destination song number). The data dial and [+]/[–] buttons can

also be used once the SONG parameter has been selected. If you select a

song number that already contains data, that data will be overwritten by

the new song data. If the destination song already contains data, the

name of the song file will appear in the middle right corner of the dis-

play.

• The song copy function cannot be

used when the song record mode is

engaged—the “Button not valid!” alert

display will appear.

• If the Clavinova’s internal memory

contains song data, the “CVP-DISK”

copy mode will be automatically se-

lected to copy the internal memory

data to disk (see the “Copying Data

Recorded Without a Disk” below) and

the “DISK 1 – 1” or “DISK 1 – 2” copy

mode cannot be selected. In this case,

copy the internal memory data to disk

first, if you want to keep the data, and

delete the internal memory data by

using the Song Delete function (page

104). Then try the “DISK 1 – 1” or

DISK 1 – 2” copy operation again.

• Only song data recorded on the CVP-

79A/69/69A/59S and Disk Orchestra

Collection orchestra and rhythm data

can be copied using this function.

• Data cannot be copied to Disk Orches-

tra Collection disks, Disklavier disks, or

any write-protected disk.

Song Copy

Song data can be “backed up” by copying to a new song number or a different disk, as follows:

(Make sure that the song record mode is not engaged before proceeding.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-69 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-69

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info