Bedienungsanleitung Yamaha CVP-69 (Seite 113 von 163) (Englisch)

599136

113

Zoom out

Zoom in

Vorherige Seite

1/163

Nächste Seite

110

Messages

When a disk related function button is pressed (ex. [PLAY]) and there is no disk in the

disk drive this prompt will appear. Put the proper disk in the drive and redo the proce-

dure.

When renaming or copying the original song data this prompt will alert you in the event

that there is no song data in the selected song number, or in the disk. Re-select a

data-containing song, or put a disk with song data into the floppy disk drive.

This alert appears if there is no Registration Memory, Micro Tuning, or related data

other than song data on the currently inserted disk when you attempt a file-related

operation. Insert a disk with the proper data and do the procedure again.

This message appears when a new disk or a non Clavinova Formatted disk has been

put into the disk drive. Press OK if you want to format the disk. Press CANCEL if you

want to abort the formatting process.

The current disk is write protected and cannot be written to. Insert a disk that is not

write protected and try the procedure again.

You have attempted to edit or record over a song that was made on another system

(i.e. computer sequencer, etc.). Song data made on other systems cannot be edited or

recorded over. You can however, edit or record over any song that you have recorded

yourself on the CVP-79A/69/69A/59S.

A button that does not have a function in the current mode has been pressed. (ex. the

[GUIDE] button has been pressed when the Song Play mode is not engaged.)

The disk drive heads are dirty and should be cleaned. Clean the heads with a commer-

cially-available floppy disk head cleaner.

An error occurred while writing to or reading from the disk. Try the operation again; if

the error occurs a second time the disk or drive may be faulty. If the drive has been

used for some time the heads may be dirty. Clean the heads with a commercially-

available floppy disk head cleaner. If the error still occurs with one disk and not others

the disk should be considered faulty and discarded. If the error occurs with all disks the

drive may be at fault. Refer the problem to your Yamaha dealer.

The disk operation (formatting, etc.) or data procedure is finished.

The disk is currently being accessed and must not be ejected from the drive.

When an operation such as DELETE is selected, this prompt will confirm that you want

to go ahead with the operation. Press YES to continue or NO to abort the operation.

The currently loaded disk is full and cannot hold anymore data. Delete any unneces-

sary data in the current disk, use a disk that has more available space or use a new

disk.

If this appears during song recording (in this case “OK” doesn’t appear), recording will

stop and recorded data up to that point will be saved automatically.

A single disk can only hold up to 60 files for each data type (song, style, registration,

etc.). If this message appears, insert a new disk or delete any unnecessary files in the

current disk. (Style Files cannot be deleted from the disk.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-69 Seite 113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-69

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info