Bedienungsanleitung Yamaha CVP-83S (Seite 23 von 76) (Englisch)

599147

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Accompaniment

■ Metronome

The CVP-87A, CVP-85A, and CVP-83S also offer a metronome function that is

ideal for practice.

To start the metronome, simply press the [METRONOME] button so that its

indicator lights. The metronome will play at the currently selected tempo whether a

style is playing or not. The metronome volume can be adjusted via the RHYTHM

volume control.

Press the [METRONOME] button again to stop the metronome sound (the

METRONOME indicator will go out). The metronome will also stop automati-

cally if the [START/STOP] button is pressed to stop a style in progress.

NOTES

• The metronome will not normally sound when a style is playing. If the style is

started by pressing the [START/STOP] button while the metronome is playing,

however, the metronome will continue to sound along with the style.

● Tap start ..................................................................................................................................................

This function lets you set the tempo and start the rhythm in one operation. Sim-

ply tap the [TAP] button at the required tempo — 3 times for a 3/4 style and 4

times for a 4/4 style. The rhythm will start from the beginning of the next measure

at the specified tempo.

NOTES

• The [TAP] button can also be used to change the tempo during rhythm playback.

In this case the “tap” click will not sound.

• If you tap the [TAP] button less than the required number of times (i.e. 3 or 4), the

tap tempo function will be cancelled after a few seconds.

TAP TEMPO

METRONOME

120

METRONOME

■ Stopping the Accompaniment

The accompaniment can be stopped at any time by pressing the [START/

STOP] button. Press the [INTRO/ENDING] button if you want to go to the

ending pattern and then stop.

NOTES

• If you started with an intro or fill-in, or using the SYNCHRO mode, these selec-

tions are maintained even after the accompaniment is stopped.

• If the left pedal is switched to START/STOP operation, it performs the same

function as the panel [START/STOP] buttons (press to START, press again to

STOP).

INTRO/ENDING

START/STOP

● Measure Number

During rhythm playback the current measure number is shown on the TEMPO

display.

● The Beat Display

The four LED dots of the BEAT display provide a visual indication of the se-

lected tempo. The leftmost (red) dot flashes on the first beat of each measure,

the second dot flashes on the second beat, and so on (all dots except the

leftmost dot are green). When a 3/4-time rhythm is selected, only the first three

dots will flash.

BEAT

1st. Beat

2nd. Beat

3rd. Beat

4th. Beat

■ Fill-ins

The CVP-87A, CVP-85A and CVP-83S provide two types of automatic “fill-

ins.”

■ Fill To Normal: Press the [NORMAL/FILL TO NORMAL] button during

playback to produce a fill-in and go to the normal rhythm.

■ Fill To Variation: Press the [VARIATION/FILL TO VARIATION] button

during playback to produce a fill-in and go to the variation pattern.

If you hold one of the FILL buttons, the fill-in will repeat until the end of the

measure in which button is released.

VARIATION NORMAL

FILL TO VARIATION

FILL TO NORMAL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-83S Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-83S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info