Bedienungsanleitung Yamaha CVP-94 (Seite 109 von 148) (Englisch)

599407

109

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

107

BStop recording. ...................................................................................................

When all recording has been finished, select page 2 of the CHORD

SEQUENCE display, then press the END MARK and SET buttons and

input an “end mark” which determines the location of the ending. The

end mark will be displayed in the box at the right of the LCD display.

• The chord sequence data now resides

in tracks 9 through 16, and can be

played back in the normal way. Add

other tracks as desired by using the

standard track selection and recording

procedure. You can also record over

the Auto Accompaniment parts and

replace them with original material if

you like by using the standard track

selection and record procedure.

• The song recorded via the Chord

Sequence function can be modified

later by re-entering the Chord Se-

quence mode and making the desired

changes. However, keep in mind that

any data recorded over the Auto Ac-

companiment parts (with normal track

recording) will be replaced by the

preset accompaniment style data. (For

example, even if you’ve recorded your

own bass part, it will be erased and

replaced by the original bass pattern if

you correct the data in the Chord

Sequence display.)

Page 2 of the CHORD SEQUENCE display contains a number of

versatile functions that help you enter chords more efficiently.

Finally, press the [REC] button and a “Save recorded data?” message

will appear. Press YES to store the recorded data and automatically

leave the Chord Sequence function; the display returns to the SONG

PLAY display. To leave without saving the data, press NO. To continue

editing the sequence without saving the data, press CANCEL.

Other Chord Sequence Functions

ALL DELETE

To delete all sequence data, press the ALL DELETE button. An “Are

you sure?” confirmation prompt appears. Press YES to execute the op-

eration, or NO to cancel.

DELETE

To delete the data at the current cursor location, press the DELETE

button. An “Are you sure?” confirmation prompt appears. Press YES to

execute the operation, or NO to cancel.

END MARK

To enter an “end mark” at the current cursor location, press the END

MARK button followed by the SET button. An end mark signifies the

end of the song, and should always be entered to properly end each song.

(An end mark is unnecessary when ending with an Ending pattern or

Fade-out.) The cursor cannot be moved past an end mark. You can de-

lete an end mark by using the DELETE button, just as with other normal

data.

End Mark

• Unless an end mark is entered, the

song will end one measure after the

last entered data. If an Ending pattern

or Fade-out is input, the song will end

at the last measure of the Ending or

Fade-out.

Song Recording

End

mark

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-94 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-94

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info