Bedienungsanleitung Yamaha CVP-94 (Seite 112 von 148) (Englisch)

599407

112

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

110

■ Track Delete — Track Edit, Page 2

The Track Delete function can be used to delete the data from any

specified track.

ZSpecify the two tracks to be mixed. .............................................

Press the TRK A and TRK B buttons to highlight the parameters, and

use the data dial or [–/+] buttons to select the two track numbers to be

mixed. The voices which are used for the selected tracks are indicated at

the side of A:/B:, located at the left of the LCD display.

XSpecify the destination track. .............................................................

Use the TRK C parameter to specify the track to which you want to

record the mixed data. You can also specify the track for the mixed data

by highlighting the appropriate section using the TRK C button, then

using the data dial or [–/+] buttons.

Any previous data in the destination track will be erased.

CExecute the Track Mix operation. ...................................................

Press the MIX button to begin execution of the Track Mix operation.

An “Are you sure?” confirmation prompt will appear. Press YES to ex-

ecute the Track Mix operation or press NO to cancel.

When this is completed, the MIX button will change to UNDO, al-

lowing you to undo the Track Mix operation and restore the previous

data (before mixing).

Press the [REC] button (the lamp goes out) to exit the Track Mix

function.

You can also exit the Track Mix function by pressing the [EXIT]

button.

• The previous data of the mixed track

will remain even after executing Track

Mix. If the old data is not needed, you

should delete it. (See “Track Delete”

below.)

• A bar graph indicating the progress of

the Track Mix operation will appear

while the data is being processed.

• You can check if the results are as you

expected or not, by starting and stop-

ping playback with the [PLAY/STOP]

button before performing the

UNDO

operation.

• The Undo function cannot be used if

you’ve selected another track or exited

from this mode.

• The Undo feature cannot be used for

data recorded to internal RAM (see

page 114).

ZSpecify the track to be deleted. ........................................................

Use the TRACK ▼ or ▲ button to highlight the Track parameter, then

use the data dial or [–/+] buttons to select the track to be deleted.

• A bar graph indicating the progress of

the Track Delete operation will appear

while the data is being processed.

• You can check if the results are as you

expected or not, by starting and stop-

ping playback with the [PLAY/STOP]

button before performing the

UNDO

operation.

XExecute the Delete operation..............................................................

Press the DELETE button. At the “Are You Sure?” confirmation

prompt, press YES to execute the Delete operation or NO to cancel.

The DELETE display will change to the UNDO display after the De-

lete operation is executed. If the result is not what you expected, press

the UNDO button to restore the data of the deleted track to what it was

before performing the Delete operation.

Song Recording

• Only tracks containing data will appear

and can be selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-94 Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-94

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info