Bedienungsanleitung Yamaha CVP-96 (Seite 110 von 164) (Englisch)

599408

110

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

108

CVP-98/96/600

CSelect the record mode. ...............................................................

Press the [REC] button.

➔ The [REC] lamp lights and the QUICK RECORD display of

record mode page 1 appears.

Call up page 1 by using the PAGE [<] [>] buttons if the lamp

is lit but the QUICK RECORD display is not shown.

• The song number for recording can be

changed in the QUICK RECORD display.

• If Auto Accompaniment is turned on when

entering the record mode, the

ACMP

RHY

track will automatically change to the

REC

display.

VSelect the part for recording. .................................................

In Quick Recording, three parts can be recorded: the right hand

part (1/RIGHT), the left hand part (2/LEFT) and the Auto Accom-

paniment & rhythm part (ACMP &RHY). Press the appropriate

button — 1/RIGHT, 2/LEFT or ACMP&RHY — to set the part

to REC (record enable) or OFF (record/playback disabled). The

PLAY (playback) setting can be selected only for parts which al-

ready contain data.

The ACMP&RHY part can automatically be set to REC by

pressing the panel [ACMP ON] button. To record only the

rhythm, leave ACMP&RHY set to REC, then press the [ACMP

ON] button so that the lamp goes out.

• Both

1/RIGHT

and

2/LEFT

cannot be set to

REC

at the same time.

Tracks Recorded with Harmony, Dual or Split

Functions

• You can record your performance with har-

mony parts using the Harmony function, or

record two different parts by using the Dual or

Split functions. Harmony is recorded to tracks

6, 7 and 8. When using Dual with recording of

the 1/RIGHT part, data is recorded to tracks 1

and 3; when using Split with recording of the 1/

RIGHT part, data is recorded to tracks 1 and 5.

When using Dual with the 2/LEFT part, data is

recorded to tracks 2 and 4; when using Split

with the 2/LEFT part, data is recorded to tracks

2 and 5.

Tracks Recorded Using Auto Accompaniment

• When recording Auto Accompaniment, the

rhythm is recorded to tracks 9 - 10, bass to

track 11, and chordal backing to tracks 12 - 16.

When a part is set to REC (record enable), recording is set to

stand-by and automatically starts when you play the keyboard.

• When the

ACMP

RHY

part is set to

REC

, the

metronome will sound to provide a timing guide

in the Synchronized Start mode before record-

ing is started. (The metronome doesn’t sound

when Synchronized Start is released.)

• The Chord Sequence recording method (page

116) lets you record Auto Accompaniment

without having to play chord parts in tempo.

Song Recording

• When any part is displayed in

REC

, the remain-

ing memory capacity of the disk (in kilobytes)

will appear directly below the measure indica-

tion in the display. Empty 2DD and 2HD disks

should have about 690KB and 1400KB, re-

spectively. This is room enough for about

50,000/100,000 notes if no other data is re-

corded.

SONG CONTROL

PAUSE REW FF REC

PL A Y

STOP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-96 Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-96

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info