Bedienungsanleitung Yamaha CVP-96 (Seite 120 von 164) (Englisch)

599408

120

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

118

CVP-98/96/600

VEnter and set the chords and/or style changes. ............

To enter a chord, either play the chord with appropriate fingering on

the left range of the Auto Accompaniment section of the keyboard (lower

than the split point), or highlight ROOT or TYPE in the LCD display and

use the data dial or [–/+] buttons.

You can also select the chord by pressing the ROOT or TYPE button.

• The input chord name also appears in

the

ROOT

and

TYPE

sections of the

display when a chord is entered via the

keyboard.

➾ To enter a style change (style, section and tempo) simply make

the appropriate selections in the normal way.

➾ Once the chord and/or style has been selected, press the SET

button. The data is recorded to the current location, and a black

box and the recorded chord name appear in the measure indica-

tion. The cursor automatically moves to the next position.

The entered data of the recorded style will be shown in the display:

the time signature, the style name and section appear at the top of the

display, and the chord name and tempo in the box at the middle of the

display.

Continue moving the cursor to other positions and enter chords and

style changes in this manner. You can always check the entered data

during the operation by playing back the sequence using the [PLAY/

STOP] button.

The data recorded by the Chord Sequence function is listed below.

Data Recorded By the Chord Sequence Function

• Accompaniment style

• Section (MAIN A/B, Intro, Ending, Auto-fill, Fade-in/out, Break)

• Chord name

• Auto accompaniment part volume (MIXER settings)

• Tempo

• Rhythm on/off

• ACMP/SONG volume (as an initial setting only)

• SMALL ACMP

• VIRTUAL ARRANGER (one ON/OFF setting for an entire song only)

• Fade-out cannot be entered during

Fade-in.

Entering Rhythm-only Sections

• You can also record the rhythm alone

(without accompaniment) to your song.

To do this, record a blank chord in the

desired measure by leaving the

TYPE

parameter set to “ - - -”.

Entering a Break

• A complete break can be created by

setting the chord type to “ - - -” and

setting rhythm sound to “OFF” (see

“RHYTHM ON/OFF” below).

• The types of chords that can be en-

tered are the same as those listed for

the fingered mode (page 59). On-

bass chords can be entered via the

keyboard.

• The measure number is indicated at

the left of the measure indication.

• For information on other useful editing

features, see the section “Chord Se-

quence Page 2 Functions” below.

• The same chord, as set previously

(i.e., the same chord shown in the box

at the middle of the display), cannot be

entered even if the

SET

button is

pressed.

Song Recording

• The chord name is indicated only at

the first beat of the measure line, with

the exception of 4/4 and 12/8 time

signatures, for which indications ap-

pear at the first and third beats.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-96 Seite 120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-96

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info