Bedienungsanleitung Yamaha CVP305 (Seite 181 von 220) (Englisch)

35478

181

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

Using Your Instrument with Other Devices

CVP-305/303/301 Owner’s Manual

181

[AUX OUT (LEVEL FIXED)] Jacks

(RCA pin jacks of [L]and [R])

When these are connected (with RCA pin plug; LEVEL

FIXED), the sound is output to the external device at a

ﬁxed level, regardless of the [MASTER VOLUME] con-

trol setting. Use these when controlling volume with an

external audio system, or recording the instrument’s

sound to an external audio system. Connect the instru-

ment’s AUX OUT [L]/[R] (LEVEL FIXED) jacks and the

AUX IN jacks of an external audio system using appro-

priate audio cables.

[OPTICAL OUT] Terminal (CVP-305)

This is used for optical output of digital audio (fre-

quency: 44.1kHz) for highest sound quality. The output

level from the [OPTICAL OUT] terminal is ﬁxed and is

unaffected by the master volume control on the instru-

ment. Use an appropriate optical cable to connect this

terminal to the optical digital input terminal of a minid-

isk (MD) recorder or CD recorder. (Make sure the con-

nectors of the cable match the terminals on both

devices.)

Since digital transfer allows you record a clear, noise-

free signal with no degradation or distortion, you can

record your favorite performances with the highest pos-

sible quality.

4 Playing External Audio Devices with

the Built-in Speakers ([AUX IN] Jacks)

The stereo outputs from another instrument can be con-

nected to these jacks, allowing the sound of an external

instrument to be reproduced via the instrument’s speak-

ers. Connect the output jacks (LINE OUT etc.) of an

external synthesizer or the tone generator module and

the instrument’s AUX IN [L/L+R]/[R] jacks using appro-

priate audio cables.

• Use only the [L/L+R] jack for connection with a monaural device.

•The instrument’s [MASTER VOLUME] setting affects the input

signal from the [AUX IN] jacks.

5 Showing the Instrument’s Display

Contents on a Separate TV Monitor

(CVP-305)

Connect the instrument to an external TV monitor, and

you can have the current display contents or lyrics (for

group sing-alongs and the like) displayed on the TV. For

instructions on connecting, see page 53.

RLRL/L+R

AUX OUT

AUX IN

(LEVEL FIXED)

Instrument

Stereo system

Audio cable

Pin plug

Instrument

MD deck etc.

Optical digital cable

Optical digital

input terminal

CAUTION

When the sound of an external device is output to the

instrument, ﬁrst turn on the power to the external device,

then to the instrument. Reverse this order when you turn

the power off.

LINE OUT

RL/L+R

AUX IN

Instrument

Synthesizer

Tone generator

Phone plug (standard)

Audio cable

Pin plug

Video out settings

1 Call up the operation display.

[FUNCTION] → [G] VIDEO OUT

2 Select the video equipment standard “NTSC”

or “PAL” by using the [1

ππ

††

] button. Select

the contents of the Video Out signal—the

current display contents (LCD) or lyrics (LYR-

ICS)—by using the [3

ππ

††

]/[4

ππ

††

] buttons.

Connecting Audio & Video Devices

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP305 Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP305

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info