Bedienungsanleitung Yamaha DGX 205 (Seite 72 von 94) (Englisch)

460054

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Reference Accessory CD-ROM Installation Guide

72 DGX-205/203, PSR-295/293 Owner’s Manual

Installing the driver on Windows 98/Me

1 Start the computer.

2 Insert the supplied CD-ROM into the CD-

ROM drive. A start window will appear auto-

matically. Close the window.

3 First, make sure the POWER switch on the

instrument is set to OFF, then use a USB

cable to connect the USB terminal of the

computer to the USB connector of the

instrument. When the instrument is turned

on, the computer automatically displays the

“Add New Hardware Wizard.” If the Add New

Hardware Wizard does not appear, click

“Add New Hardware” in the Control Panel.

For Windows Me users, check the radio button to the

left of “Automatic search for a better driver (Recom-

mended)” and click [Next]. The system automati-

cally starts searching and installing the driver.

Proceed to Step 8. If the system does not detect the

driver, select “Specify the location of the driver

(Advanced)” and specify the CD-ROM drive’s

“USBdrv_” folder to install the driver and click

[Next]. Execute the installation by following the

onscreen instructions and proceed to Step 8.

4 Click [Next].

The window that appears enables you to select the

search method.

5 Check the radio button to the left of “Search

for the best driver for your device. (Recom-

mended).” Click [Next].

The window that appears enables you to select a

location in which to install the driver.

6 Check the “Specify a location” box, click

“Browse..”, then specify the USBdrv direc-

tory of the CD-ROM drive (such as

D:\USBdrv_\) and continue the installation.

7 When the system detects the driver on the

CD-ROM and is ready for installation, an

appropriate message will appear on the

screen. Make sure that the “YAMAHA USB

MIDI Driver” is listed, and click [Next]. The

installation process will begin.

8 When installation is complete, a message

indicating so appears. Click [Finish].

The driver has been installed.

Installing the driver on Windows 2000

1 Start the computer and use the “Administra-

tor” account to log into Windows 2000.

2 Select [My Computer] ➔ [Control Panel] ➔

[System] ➔ [Hardware] ➔ [Driver Signing] ➔

[File Signature Veriﬁcation], and check the

radio button to the left of “Ignore — Install

all ﬁles, regardless of ﬁle signature” and

click [OK].

3 Insert the supplied CD-ROM into the CD-

ROM drive. A start window will appear auto-

matically. Close the window.

4 First, make sure the POWER switch on the

instrument is set to OFF, then use a USB

cable to connect the USB connector of the

computer to the USB connector of the

instrument. When the instrument is turned

on, the computer automatically displays

“Found New Hardware Wizard.” Click [Next].

5 Check the radio button to the left of “Search

for a suitable driver for my device. (Recom-

mended).” Click [Next].

The window that appears enables you to select a

location in which to install the driver.

6 Check the “CD-ROM drives” box and

uncheck all other items. Click [Next].

7 When the installation is complete, the sys-

tem displays “Completing the Found New

Hardware Wizard.” Click [Finish].

8 Restart the computer.

The driver has been installed.

• If you are using Windows Me, skip Step 4 – 7.

NOTE

• Some computers may take about ten seconds to show this screen

after the installation is complete.

NOTE

• The system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the “USBdrv2k_” directory of the CD-

ROM drive (such as D:\USBdrv2k_\) and continue the installation.

NOTE

• Some computers may take about ten seconds to show this screen

after the installation is complete.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DGX 205 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DGX 205

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info