Bedienungsanleitung Yamaha DGX-300 (Seite 11 von 112) (Englisch)

635448

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Setting Up

Turning On the Power

With the AC power adaptor connected or

with batteries installed, simply press the

power switch until it locks in the ON posi-

tion. When the instrument is not in use, be

sure to turn the power off. (Press the switch

again so that it pops up.)

Accessory Jacks

■ Using Headphones• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

For private practicing and playing without dis-

turbing others, connect a set of stereo headphones

to the rear panel PHONES/OUTPUT jack.

Sound from the built-in speaker system is auto-

matically cut off when you insert a headphone

plug into this jack.

■ Connecting a Keyboard Ampliﬁer or Stereo System • • • • • • •

Though the DGX-500/300 is equipped with a

built-in speaker system, you can also play it

through an external ampliﬁer/speaker system.

First, make sure the DGX-500/300 and any exter-

nal devices are turned off, then connect one end

of a stereo audio cable to the LINE IN or AUX IN

jack(s) of the other device and the other end to

the rear panel PHONES/OUTPUT jack on the

DGX-500/300.

■ Using a Footswitch• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

This feature lets you use a footswitch (Yamaha

FC4 or FC5) to sustain the sound of the voices.

The footswitch functions the same way as a

damper pedal on an acoustic piano — press and

hold down the footswitch as you play the key-

board to sustain the sound.

■ Using the MIDI Terminals • • • • • • • • • • • • • • • • • • • • • • • • • • •

The DGX-500/300 also features MIDI terminals,

allowing you to interface the DGX-500/300 with

other MIDI instruments and devices. (For more

information, see page 84.)

• Even when the switch is in the “STANDBY” position,

electricity is still ﬂowing to the instrument at the mini-

mum level. When you are not using the DGX-500/300 for

a long time, make sure you unplug the AC power adap-

tor from the wall AC outlet, and/or remove the batteries

from the instrument.

Stereo System

• To prevent damage to the

speakers, set the volume of the

external devices at the mini-

mum setting before connect-

ing them. Failure to observe

these cautions may result in

electric shock or equipment

damage. Also, be sure to set

the volumes of all devices at

their minimum levels and grad

ually raise the volume controls

while playing the instrument to

set the desired listening level.

• Make sure that the footswitch

plug is properly connected to the

FOOT SWITCH jack before turn-

ing on the power.

• Do not press the footswitch while

turning the power on. Doing this

changes the recognized polarity

of the footswitch, resulting in

reversed footswitch operation.

MIDI

instrument

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DGX-300 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DGX-300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info