Bedienungsanleitung Yamaha DPX-1000 (Seite 15 von 207) (Deutsch, Französisch, Italienisch, Spanisch)

464209

Zoom out

Zoom in

Vorherige Seite

1/207

Nächste Seite

E-12

Basic Operations

■ Preparations for projection

Carry out the adjustments necessary to the projection image to

obtain the optimum setting for projection.

The initial setting on this unit is for projection of the image in a

line directly from the center of the lens. Where the center of the

screen is above or below the center of this line, use the V. POS

function to adjust the vertical position of the image up or down.

V. POS can adjust the image up to half the height of the screen.

1. Press the V. POS button on the remote control or the

SETTING button on the main unit repeatedly to place

the unit in vertical position adjustment (Lens shift)

mode.

2. Adjust the image to a suitable position by pressing

either the h or g buttons.

3. Press the V. POS button again or the ESCAPE button

to exit from the vertical position adjustment mode.

Enlarge or reduce the size of the image to fit the size of the screen.

The maximum extent of this zoom is 1:1.6.

1. Press the ZOOM button on the remote control or the

SETTING button on the main unit repeatedly to place

the unit in zoom adjustment (Zoom) mode.

2. Adjust the image to a suitable size by pressing either

the h or g buttons.

3. Press the ZOOM button again or the ESCAPE button

to exit from the adjustment mode.

Adjust the focus of the projected image.

1. Press the PATT button on the remote control or the

PATTERN button on the main unit to display a test

pattern for adjustment.

2. Press the FOCUS button on the remote control or the

SETTING button on the main unit repeatedly to place

the unit in focus adjustment mode.

3. Adjust the unit to an optimal focus setting by

pressing either the h or g buttons.

4. Press the FOCUS button again or the ESCAPE button

to exit from the focus adjustment (Focus) mode.

This unit is equipped with an IRIS function to switch between the

high levels of black and high contrast images important in a home

theatre and the bright images needed for a large screen. Use this

function as best suits your needs.

1. Press the IRIS button on the remote control or the

SETTING button on the main unit repeatedly to place

the unit in iris diaphragm adjustment (Iris) mode.

2. Adjust the unit to an optimal iris setting by pressing

either the + or – buttons.

3. Press the IRIS button again or the ESCAPE button to

exit from the iris adjustment mode.

This unit is equipped with three test patterns: a crosshatch pattern

useful for focus adjustment, and gray scale and color bar patterns

for image adjustment. Use them as best suits your needs.

1. Press the PATT button on the remote control or the

PATTERN button on the main unit to display a test

pattern for adjustment.

2. Select a suitable test pattern by pressing either the +

or – buttons.

3. Press the PATT button again or the PATTERN button

on the main unit to exit from the adjustment mode.

INPUT

AUTO

SETTING

ASPECT

ESCAPE

PATTIRIS

ZOOM FOCUSV. POS

PATTIRIS

FOCUS

V. POS

ZOOM

ESCAPE

STANDBY

SETTING

LAMP COVER TEMP FAN

PATTERN

ESCAPE

INPUT

ASPECT

SETTING

ESCAPE

104_DPX-1000(E)11-15 03.3.5, 6:13 PM12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DPX-1000 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DPX-1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info