Bedienungsanleitung Yamaha DS4E3PRO PE (Seite 177 von 197) (Englisch)

590420

177

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

MIDI Data Format

Appendix

A-23

MIDI Data Format

Portamento Control cancels the Portamento Source Key

Number that was received

RPN number not specified; internal data

will not change

NRPN number not specified; internal data

will not change

1.2.23.3 All Note Off

(Piano Part, ESBL Part) (transmitted)

Terminates all notes currently on for the specified channel.

However, if Hold 1 or Sostenuto is on, notes will continue

sounding until these are turned off.

1.2.23.4 Omni Off

(Piano Part, ESBL Part)

Performs the same function as when an All Notes Off message is

received.

1.2.23.5 Omni On

(Piano Part, ESBL Part)

Performs the same function as when an All Notes Off message is

received.

1.2.23.6 Mono

(Piano Part, ESBL Part)

Performs the same function as when an All Sounds on message is

received, and if the 3rd byte (mono number) is in the range of 0 -

16, sets the corresponding channel to Mono Mode (Mode 4 : m =

1).

1.2.23.7 Poly

(Piano Part, ESBL Part)

Performs the same function as when an All Sounds Off message

is received. and sets the corresponding channel to Poly Mode

(Mode 3).

1.2.24 Local Control

(Piano Part, ESBL Part)

0;Off Disklavier keyboard does not play the internal voices.

127;On

1.3 Program Change

(ESBL Part) (transmitted)

Messages for Voice selection.

With a combination of Bank Select, you can select not only basic

Voice numbers, but also variation Voice bank numbers.

1.4 Pitch Bend

(ESBL Part)

When Multi Part Parameter Rcv PITCH BEND CHANGE=OFF,

pitch bend for that part is not received.

1.5 Channel Aftertouch

(ESBL Part)

1.6 Polyphonic Aftertouch

(ESBL Part) (PianoPart) (transmitted)

Applying further pressure on the key does not output “key

aftertouch” information. Instead, key position is transmitted as

additional information.

2. SYSTEM EXCLUSIVE MESSAGES

2.1 Parameter Change

The Disklavier receives the following parameter change

messages.

[UNIVERSAL REALTIME MESSAGE]

1) Master Volume

[UNIVERSAL NON REALTIME MESSAGE]

1) General MIDI Mode On

[XG NATIVE]

1) XG System on

2) XG System Data parameter change

3) Multi Effect1 Data parameter change

4) Multi Part Data parameter change

5) Drums Setup Data parameter change

[OTHER]

1) Master tuning

2) TG300 System Data Parameter change

3) TG300 Multi Effect Data parameter change

4) TG300 Multi Part Data parameter change

2.1.2 Universal Realtime Messages

2.1.2.1 Master Volume

(Piano Part, ESBL Part)

11110000 F0 = Exclusive status

01111111 7F = Universal Real Time

01111111 7F = ID of target device

00000100 04 = Sub-ID #1=Device Control Message

00000001 01 = Sub-ID #2=Master Volume

0sssssss *SS = Volume LSB

0ttttttt TT = Volume MSB

11110111 F7 = End of Exclusive

11110000 F0 = Exclusive status

01111111 7F = Universal Real Time

0xxxnnnn XN = Device Number, xxx = don’t care

00000100 04 = Sub-ID #1=Device Control Message

00000001 01 = Sub-ID #2=Master Volume

0sssssss SS = Volume LSB

0ttttttt TT = Volume MSB

11110111 F7 = End of Exclusive

When received, the Volume MSB will be effective for the

System Parameter MASTER VOLUME.

* “SS” is the hexadecimal expression of Osssssss; same as for

“tt”, “aa”, etc.

2.1.3 Universal Non-Realtime Messages

2.1.3.1 General MIDI Mode On

(ESBL Part)

11110000 F0 = Exclusive status

01111110 7E = Universal Non-Real Time

01111111 7F = ID of target device

00001001 09 = Sub-ID #1=General MIDI Message

00000001 01 = Sub-ID #2=General MIDI On

11110111 F7 = End of Exclusive

11110000 F0 = Exclusive status

01111110 7E = Universal Non-Real Time

0xxxnnnn XN = Device Number, xxx = don’t care

00001001 09 = Sub-ID #1=General MIDI Message

00000001 01 = Sub-ID #2=General MIDI On

11110111 F7 = End of Exclusive

When General MIDI Mode On is received. the play mode will be

changed to XG mode.

When this happens, the ESBL part will receive the MIDI

messages which compatible with GM System Level 1, and

consequently will not receive NRPN and Bank Select messages.

Since approximately 50ms is required to execute this messag, be

sure to leave an appropriate interval before the subsequent

message.

2.1.4 XG Native Parameter Change

(ESBL Part)

With the Parameter Change messages as listed below, you can

change the characteristic of a Voice, such as by Effect Type or

effect parameter, transpose, tuning, and others.

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0001nnnn 1n Device Number

01001100 4C XG Model ID

0aaaaaaa aaaaaaa Address High

0aaaaaaa aaaaaaa Address Mid

0aaaaaaa aaaaaaa Address Low

0ddddddd ddddddd Data

11110111 F7 End of Exclusive

* Any number is OK since the device number for the Disklavier

is fixed to “All.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DS4E3PRO PE Seite 177

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DS4E3PRO PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info