Bedienungsanleitung Yamaha DSP-A595 (Seite 26 von 323) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557378

Zoom out

Zoom in

Vorherige Seite

1/323

Nächste Seite

To play a tape or an MD

Press TAPE/MD MON / EXT. DECODER so that the “TAPE/MD

MON” indicator lights up on the display, then play the tape or

MD.

Front panel Remote control

To stop playing the tape or MD, press TAPE/MD MON / EXT.

DECODER twice so that the “TAPE/MD MON” indicator and

“EXT. DECDR” disappear from the display and the play stops

(or press TAPE/MD once on the remote control transmitter).

To use a decoder connected to the EXTERNAL

DECODER INPUT terminals

Press TAPE/MD MON / EXT. DECODER once or more so that

the “EXT. DECDR” appears on the display.

Start the play by operating the DTS or other external decoder,

DVD player or LD player.

Front panel Remote control

To stop playing, press TAPE/MD MON / EXT. DECODER once

so that “EXT. DECDR” disappears from the display and the play

stops (or press EXT. DEC. on the remote control transmitter).

When you finish using this unit

Press STANDBY/ON on the front panel again or STANDBY on

the remote control transmitter to turn this unit into the standby

mode.

Notes on using INPUT

• By using INPUT, you can to select the program sources

connected to the input terminals on the rear panel.

• To play a video source connected to the VIDEO AUX

terminals on the front panel, set INPUT to the VIDEO AUX

position.

• The audio source selected by INPUT will not be played if the

“TAPE/MD MON” indicator lights up or if “EXT. DECDR” is

displayed.

• If you select INPUT for a video source without canceling the

selection of TAPE/MD MON / EXT. DECODER on the front

panel (or, TAPE/MD or EXT. DEC. on the remote control

transmitter), the playback result will be the video image from

the video source and the sound from the input source

selected by TAPE/MD MON / EXT. DECODER on the front

panel (or, TAPE/MD or EXT. DEC. on the remote control

transmitter).

• Once you play a video source, its video image will not be

interrupted even if INPUT for an audio source is selected.

• When you select an input source by using INPUT, the DSP

program (or no DSP program) that was used when the same

input source was selected the last time, will be automatically

recalled.

Switching the input mode

(for DVD/LD and TV/DBS)

This unit allows you to switch the input mode only for sources

connected to the DVD/LD and TV/DBS input terminals (on the

rear panel of this unit) that input two or three types of signals.

The following two input modes are provided.

AUTO: For the source connected to the DVD/LD input

terminals:

This mode is automatically selected when you turn the

power of this unit on. In this mode, input signal is

automatically selected in the following order of priority.

1. Digital input signal from the COAXIAL terminal

2. Digital input signal from the OPTICAL terminal

3. Analog input signal

For the source connected to the TV/DBS input

terminals:

This mode is selected when you turn the power of this

unit on if the AUTO position is selected on “10. INPUT”

in the SET MENU mode. (For details, see page 36.)

In this mode, input signal is automatically selected in

the following order of priority.

1. Digital input signal from the OPTICAL terminal

2. Analog input signal

ANALOG:

In this mode, only analog input signal is selected even

if a digital signal is input at the same time.

Select this mode when you want to use the analog

input signal instead of the digital input signal.

Notes on input mode selection

• To playback a source with the Dolby Digital-decoded, set the

input mode to AUTO.

• For the TV/DBS source only, the input mode selected on the

function “10. INPUT” in the SET MENU mode is effective

when you turn the power of this unit on.

• When you want to enjoy a source which has normal

2-channel signals with a Dolby Pro Logic Surround program,

select the ANALOG mode.

• In the AUTO mode, there may be a case depending on some

LD players or DVD players that when you make a search on

a source encoded with the Dolby Digital during the play and

then the play is restored, sound output is interrupted for a

moment because the digital input signal is selected again.

DSP-A595-3 3/25/99, 3:53 PM26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-A595 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info