Bedienungsanleitung Yamaha DSP-AZ1 (Seite 41 von 110) (Englisch)

464179

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

E-39

PREPARATIONS

English

SPEAKER OUTPUT LEVELS

TEST DOLBY SUR.

Select “TEST DOLBY SUR.” to match the output levels of the center, rear center and left and right rear speakers to the left and right main

speakers.

Press TEST on the remote control.

“TEST DOLBY SUR.” appears on the video monitor and front

panel display.

The test tone is produced from the left main speaker, center

speaker, right main speaker, right rear speaker, rear center

speaker and left rear speaker in order. The tone is produced for

2.5 seconds each time. You can also select the speaker to be

adjusted by pressing

/ .

Caution

• Speakers whose settings are set to “NONE” in “1 SPEAKER

SET” (except for “1A CENTER SP”) on the SET MENU will

be skipped and no test tone will be output.

Adjust VOLUME +/– so you can hear the test tone.

Caution

• If the test tone cannot be heard, turn down the volume, set

this unit in the standby mode and check the speaker connec-

tions.

TEST

LEFT

TEST DOLBY SUR.

LEFT

Press +/– repeatedly to adjust the output level of the

effect speakers so that the output level coming from

each speaker is the same.

Each speaker level can be adjusted in the range of –10 to +10

dB.

While adjusting, the test tone is heard from the selected

speaker.

Cautions

• If “1A CENTER SP” on the SET MENU is set to “NONE”,

the center channel sound is automatically output from the left

and right main speakers.

• If “1D REAR CT SP” on the SET MENU is set to “NONE”,

the output level of the rear center speaker cannot be adjusted

in step 3.

• Main L/R speaker level cannot be adjusted by itself. Use

VOLUME to adjust the main volume.

Press TEST to enter the TEST DSP mode.

Press TEST again to stop the test tone and the DSP program

name appears on the front panel display and the video monitor.

Notes

• The tonal quality of the speakers can be adjusted using the “4

CENTER GEQ”, “5 REAR CT GEQ”, and “6 CINEMA EQ”

items in the SET MENU (see pages 55 to 57).

• You can increase the output levels of the effect channels (left rear,

right rear, rear renter and center) to +10 dB. If the output level of

the center, rear, and rear center speakers is lower than that from

the main speakers even after you have increased the sound volume

level of the center, rear, and rear center speakers up to +10 dB, set

the “1G MAIN LEVEL” item in the SET MENU to “–10dB”.

Setting the “1G MAIN LEVEL” item to this setting decreases the

main speaker volume level to about one-third the normal level.

After you set the “1G MAIN LEVEL” item in the SET MENU to

“–10dB”, adjust the levels for the center, rear, and rear center

speakers again.

• The adjustment of output levels of the center speaker, and left and

right rear speakers is also effective to the speaker output level

during the playback of the source connected to 6CH INPUT jacks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-AZ1 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-AZ1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info