Bedienungsanleitung Yamaha DSP-AZ1 (Seite 109 von 110) (Englisch)

464179

109

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

E-107

APPENDIX

English

SPECIFICATIONS

■ Audio Section

Minimum RMS Output Power per Channel

MAIN L/R, CENTER, REAR L/R/C

(20 Hz to 20 kHz, 0.015% THD, 8 Ω) ............................... 130 W

FRONT L/R (1 kHz, 0.05% THD, 8 Ω) ............................... 45 W

Maximum Power [for General and China models]

MAIN L/R, CENTER, REAR L/R/C

(1 kHz, 10% THD, 8 Ω) ..................................................... 200 W

FRONT L/R (1 kHz, 10% THD, 8 Ω) .................................. 65 W

Dynamic Power (IHF) [for General and China models]

MAIN L/R (8/6/4/2 Ω) .................................. 160/200/260/360 W

Dynamic Headroom [for General and China models]

MAIN L/R (8 Ω) ................................................................ 1.3 dB

DIN Standard Output Power per Channel

[for Europe and U.K. models]

MAIN L/R (1 kHz, 0.7% THD, 4 Ω) ................................. 210 W

IEC Power [for Europe and U.K. models]

MAIN L/R (1 kHz, 0.015% THD, 8 Ω) ............................. 140 W

Power Band Width

MAIN L/R (55 W, 0.04% THD, 8 Ω) ................. 10 Hz to 50 kHz

Damping Factor

MAIN L/R (20 Hz to 20 kHz, 8 Ω) ........................... 200 or more

Input Sensitivity/Impedance (100 W/8 Ω)

CD, etc. ................................................................. 150 mV/47 kΩ

PHONO MM ......................................................... 2.5 mV/47 kΩ

MAIN IN ...................................................................... 1 V/47 kΩ

Output Level/Impedance

REC OUT ............................................................. 150 mV/600 Ω

MAIN OUT ................................................................. 1 V/1.2 kΩ

SUBWOOFER

[SPLIT L/R] ................................................................ 2 V/1.2 kΩ

[MONO] ...................................................................... 4 V/1.2 kΩ

PHONES Output ....................................................... 150 mV/100 Ω

Frequency Response (10 Hz to 100 kHz)

CD, etc. to MAIN L/R SP. OUT .......................................... –3 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

CD, etc. to MAIN OUT (1 V) ............................... 0.005% or less

MAIN IN to SP OUT (65 W/8 Ω) ......................... 0.005% or less

Signal to Noise Ratio (IHF-A network)

(Input shorted, EFFECT off, 250 mV) ................ 100 dB or more

Residual Noise (IHF-A network)

MAIN L/R SP. OUT .............................................. 150 µV or less

Channel Separation (Vol –30 dB, 5.1 kΩ terminated)

1 kHz/10 kHz ............................................... 70 dB/60 dB or more

Tone Control (MAIN L/R)

Bass Boost/Cut .................................................... ±10 dB (50 Hz)

Treble Boost/Cut ............................................... ±10 dB (20 kHz)

Bass Extension ...................................................... +6 dB (60 Hz)

■ Video Section

Video Signal Type

[Europe and U.K. models] ..................................................... PAL

[General and China models] ....................................... NTSC/PAL

Composite Video Signal Level ...................................... 1 Vp-p/75 Ω

S-Video Signal Level

Y ............................................................................... 1 Vp-p/75 Ω

C ........................................................................ 0.286 Vp-p/75 Ω

Component Video Signal Level

Y ............................................................................... 1 Vp-p/75 Ω

B/CB, PR/CR .......................................................... 0.7 Vp-p/75 Ω

Maximum Input Level .......................................................... 1.5 Vp-p

Signal to Noise Ratio .................................................. 50 dB or more

Frequency Response (MONITOR OUT)

VIDEO, S VIDEO ................................... 5 Hz to 10 MHz, –3 dB

COMPONENT VIDEO ........................... DC to 100 MHz, –3 dB

■ General

Power Supply

[Europe and U.K. models] ................................. AC 230 V, 50 Hz

[General and China models] .... AC 110/120/220/240 V, 50/60 Hz

Power Consumption ................................................................ 650 W

Standby Mode [Europe and U.K. models] .......................... 1.2 W

Standby Mode [General and China models] ....................... 1.5 W

AC Outlets (Total 100 W maximum)

[U.K. model] ............................................................. 1 (Switched)

[Other models] .......................................................... 3 (Switched)

Dimensions (W x H x D) .................................. 435 x 211 x 473 mm

(17-1/8” x 8-1/4” x 18-5/8”)

Weight ................................................................. 28 kg (61 lbs 11 oz)

Accessories ................................................................ Remote control

Batteries (3) (LR6)

Power cord (except for U.K. model)

* Specifications are subject to change without notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-AZ1 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-AZ1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info