Bedienungsanleitung Yamaha DSP-Z7 (Seite 76 von 154) (Englisch)

516900

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

76 En

Graphical user interface (GUI) menu

Surround Back

(Surround back left/right speakers)

If you are only using one surround back speaker, connect it to

the SUR.BACK SINGLE jack, and configure the “Surround

Back L” settings under “Distance” and “Level”.

Cross Over (Cross over)

Use this feature to select the crossover frequency of the

speaker(s) that is set to “Small”. All frequencies below the

selected frequency will be sent to the subwoofer or to the

speakers set to “Large” in “Configuration”.

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Front Presence (Front presence speakers)

Use this feature if you want to use the front presence

speakers connected to this unit.

Subwoofer (Subwoofer)

Phase (Subwoofer phase)

Use this feature to switch the phase of your

subwoofer if bass sounds are lacking or unclear.

Bass Out (Bass out)

Use this feature to select the speakers that output the

LFE (low-frequency effect) and the low-frequency

signals.

LFE signals output

Low-frequency signals output

■ Distance (Speaker distance)

Use this feature to manually adjust the distance of each

speaker and the delay applied to the respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in most

home situations. Thus, a certain amount of delay must be

applied to the sound from each speaker so that all sounds will

arrive at the listening position at the same time.

Unit (Unit)

Selects the unit for displaying the values of “Distance”

parameter.

Choice Descriptions

Large x1

Select this setting when the single surround

back speaker is large.

Small x1

Select this setting when the single surround

back speaker is small.

Small x2

Select this setting when the surround back

left and right speakers are small.

Large x2

Select this setting when the surround back

left and right speakers are Large.

None

Select this setting when you do not use the

surround back speakers. The surround back

channel signals are directed to the surround

left and right speakers.

Note

Choice Descriptions

Yes

Select this setting when you use the front

presence speakers.

None

Select this setting when you do not use the

front presence speakers.

Choice Functions

Normal

Does not change the phase of your subwoofer.

Reverse

Sets the phase of the subwoofer to reverse.

Choice

Subwoofer and speakers

Subwoofers

Front

speakers

Other

speakers

Front +

SWFR

Output No output No output

SWFR

Output No output No output

Front

No output Output No output

Choice

Subwoofer and speakers

Subwoofers

Front

speakers

Other

speakers

Front +

SWFR

*1 Output(s) the low-frequency signals of the front

channels and other speakers set to “Small”.

*2 Always output the low-frequency signals of the front

channels.

*3 Output the low-frequency signals if the speakers are set

to “Large”.

SWFR

*4 Outputs the low-frequency signals of the speakers set to

“Small”.

*3 *3

Front

No output *1 *3

Choice Functions

Meter (m)

Adjusts speaker distances in meters.

Feet (ft)

Adjusts speaker distances in feet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-Z7 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-Z7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info