Bedienungsanleitung Yamaha DSP-Z7 (Seite 79 von 154) (Englisch)

516900

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

79 En

Graphical user interface (GUI) menu

ADVANCED

OPERATION

■ Parametric EQ (Parametric equalizer)

Use this feature to adjust the parametric equalizer of each

speaker.

PEQ Data Copy (Parametric equalizer data copy)

Use this feature to copy the result data of the automatic

setup to the manual configuration area. You can select the

parametric equalizer type applied to the copied result data

of the automatic setup. See page 39 for the descriptions of

each parametric equalizer type.

PEQ Select (Parametric equalizer type select)

Use this feature to select the parametric equalizer type that

applied to the results of the automatic setup. See page 39

for the descriptions of each parametric equalizer type.

• When you carry out the automatic setup, this unit automatically

set “PEQ Select” to “Natural”.

• “Level” settings (page 77) also change corresponding to the

setting of “PEQ Select”.

• This unit does not change the configurations of “Manual” even

if you perform the automatic setup.

Manual parametric equalizer configuration of

each speaker

Use this feature to adjust the tonal quality of each speaker.

You can copy the results of the automatic setup for the

base of the manual configuration by using “PEQ Data

Copy”. Set “PEQ Select” to “Manual” in advance.

1 Press

k / n / l / h to select “Test Tone” or

the speaker you want to adjust.

Test Tone

Use this feature to select whether to turn on or off the

test tone output while you are adjusting the tonal

quality of each speaker.

2 Press

h to access the settings window.

3 Press

k / n / l / h to select “PARAM” and

then press

ENTER repeatedly to select a

parameter from “Band” (band), “Freq.”

(frequency) or “Q” (Q factor).

You can adjust “Gain” (gain) with any parameter.

Choice Descriptions

Flat h Manual

Copies the result of the automatic setup that

the “Flat” type parametric equalizer is

applied to.

Front h Manual

Manual Copies the result of the automatic

setup that the “Front” type parametric

equalizer is applied to.

Natural

Manual

Copies the result of the automatic setup that

the “Natural” type parametric equalizer is

applied to.

Choice Descriptions

Manual Applies the manually configured parametric

equalizer in “Setup”.

Flat

Applies the “Flat” type parametric equalizer.

Front

Applies the “Front” type parametric

equalizer.

Natural

Applies the “Natural” type parametric

equalizer.

Through

Does not use the parametric equalizer.

Notes

Choice Adjusted speaker

Front L

Front left speaker

Front R

Front right speaker

Center

Center speaker

Surround L

Surround left speaker

Surround R

Surround right speaker

Surround Back L

Surround back left speaker

Surround Back R

Surround back right speaker

Front Presence L

Front presence left speaker

Front Presence R

Front presence right speaker

Subwoofer

Choice Functions

Outputs the test tone.

Off

Does not output the test tone.

PEQ Data Copy

PEQ Select

Front L

Front R

Center

PARAM RESET

EDIT EXIT

Band / Gain

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-Z7 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-Z7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info