Bedienungsanleitung Yamaha DSP-Z7 (Seite 85 von 154) (Englisch)

516900

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

85 En

Graphical user interface (GUI) menu

ADVANCED

OPERATION

Subnet Mask (Subnet mask)

Use this parameter to specify the subnet mask value

assigned to this unit.

For most of the cases, the subnet mask value can be set as

“255.255.255.0”.

Default Gateway (Default gateway)

Use this parameter to specify the IP address of the default

gateway.

DNS Server (P) (Primary DNS server)

DNS Server (S) (Secondary DNS server)

Use this parameter to specify the IP address of the primary

and secondary DNS (Domain Name System) servers.

If you have only one DNS address, enter the DNS address in

“DNS Server (P)”. If you have two or more DNS addresses,

enter one of them in “DNS Server (P)” and another in “DNS

Server (S)”.

■ Network Standby (Network standby)

Use this feature to select whether this unit accepts the

commands via LAN network when this unit is in the

standby mode.

When “Network Standby” is set to “On”, the amount of power

consumption in the standby mode increases.

■ Information (Network information)

Use this feature to display the network system

information.

MAC Address

(MAC (Media Access Control) address)

This information displays the MAC address that is

assigned to this unit.

Status (Network status)

This information displays the current link status of the

network.

Display status: 10BASE-T, 100BASE-TX, No Link,

Full Duplex, Half Duplex

“No Link” appears when network connection is not made.

System (System ID)

This information displays the system ID that is assigned to

this unit.

Use this menu to set the functions of the multi-zone

configuration.

■ Zone SP Assign

(Zone speaker assignment)

Use this feature to assign the speaker terminals for Zone 2

and Zone 3.

If you want use the external amplifiers for the all channels in the

main zone, you can use all the speaker terminals of this unit for

Zone 2 and/or Zone3 (pre-amplifier mode). Set “PREAMP

MODE” in “ADVANCED SETUP” to “ON” (page 114).

1 Press 9k / n to select the speaker terminal

and then press 9l / h repeatedly to select

the desired zone of which you want to use

the speakers.

M : Main zone

2 : Zone 2

3 : Zone 3

2 Press 9k / n to select “OK” and then press

ENTER to confirm the setting.

• To return to the previous menu level without change,

select “CANCEL” in step 2.

■ Component Assign

(Component assignment)

Use this feature to assign the COMPONENT VIDEO

(MONITOR OUT/ZONE OUT) jacks to the main zone or

another zone. Video signals are directed to the video

monitor in the selected zone if the corresponding input

source is selected.

Note

Choice Descriptions

Off

Does not accept the operations via LAN

network when this unit is in the standby mode.

Accepts the operations via LAN network when

this unit is in the standby mode.

Note

Setup (Multi Zone)

Note

Choice Functions

Main

Select this setting when you want to connect the

video monitor in the main zone to the

COMPONENT VIDEO (MONITOR OUT/

ZONE OUT) jacks.

Zone2

Select this setting when you want to connect the

video monitor in the Zone 2 to the

COMPONENT VIDEO (MONITOR OUT/

ZONE OUT) jacks.

SP1

SP2

M23

Zone :

SP Terminal :

–23

CANCEL

Zone4 Set

Zone OSD

Zone SP Assign

Component Assign

Party Mode Set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-Z7 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-Z7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info