Bedienungsanleitung Yamaha DSP-Z7 (Seite 88 von 154) (Englisch)

516900

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

88 En

Graphical user interface (GUI) menu

4 Press 9k / n /l / h to select “EXIT” and

then press 9ENTER.

You cannot select a specific item more than once for the

same type of jack.

■ Input Rename (Input rename)

Use this feature to change the name of the input source

that appears in the GUI screen and in the front panel

display.

1 Press 9k / n /l / h to select a character or

function and then press 9ENTER to

confirm the selection.

Repeat step 1 until you input a name you want to use.

2 Press 9k / n /l / h to select “SAVE” and

then press 9ENTER.

• To reset the name, select “RESET” and then press

9ENTER.

• To cancel the operation without change, select

“CANCEL” and then press 9ENTER.

■ Display Set (Display settings)

Front Panel Display (Front panel display setting)

Dimmer (Dimmer)

Use this feature to adjust the brightness of the front

panel display.

Control range: –4 to 0

Scroll (Front panel display message scroll)

Use this feature to set the front panel display message

scroll pattern.

Short Message (Short message display)

Use this feature to activate or deactivate the short message

display displayed in the GUI screen in the main zone.

The short message display (except some status messages) does

not appear when the component video signals with 720p, 1080i

or 1080p resolutions are input.

Playback Screen (Playback screen display time)

Use this feature to set the playback screen display time.

This setting is applied to the GUI screen in the main zone and

OSD in Zone 2, Zone 3, or Zone 4.

Position (GUI screen position)

Use this feature to adjust the vertical and horizontal

position of the GUI screen.

Control range: –5 (downward/left) to +5 (upward/right)

Wall Paper (Wall paper)

Use this feature to display the wall paper or gray

background in your video monitor when there is no video

signal being input.

Choice Functions

Continue

Continuous mode.

Select this to display the operation status in the

front panel display in a continuous manner.

Once

Scroll-once mode.

Select this to display the operation status in the

front panel display by the first 14 alphanumeric

characters after scrolling all characters once.

Choice Functions

Activates the short message display function.

Off

Deactivates the short message display function.

Note

Choice Functions

Always

Displays the menu unceasingly during an

operation.

10sec

Turns off the menu 10 seconds after you

perform a certain operation.

30sec

Turns off the menu 30 seconds after you

perform a certain operation.

Button Moving direction of the GUI display

Down

Right

Left

Choice Functions

None

Does not display any background in your video

monitor.

Piano

Displays a background image (the photograph

of a piano) in your monitor when there is no

video signal being input.

Horn

Displays a background image (the photograph

of a horn) in your monitor when there is no

video signal being input.

Electric Guitar

Displays a background image (the photograph

of an electric guitar) in your monitor when there

is no video signal being input.

Gray

Display a gray background in your monitor

when there is no video signal being input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-Z7 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-Z7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info