Bedienungsanleitung Yamaha dvd s 520 (Seite 13 von 23) (Englisch)

139095

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English

PREPARATION

Sound

– Digital output

Factory setting: ALL. This means digital output is on. If you

are not connecting to equipment with a digital input, change

the setting to Off.

If your equipment doesn't include a digital multi-channel

decoder, set the digital output to PCM only (Pulse Code

Modulation).

1en1en 1 2

Digital output

Analog output

Night mode

All

PCM only

Off

Note:

– When the setting is ALL, make sure that the selected audio

format of the disc you play matches the connected

equipment’s capability. If a digital signal which the equipment

cannot handle is output, there may be a noise and that could

damage your ears and your speakers.

– When CDs were put on the market in the early stage, high

tones from some of them would be heard as punch lacked.

– Analog output

Select Stereo, Dolby Surround or 3D Sound (TruSurround)

to match your system’s playback capability.

1en1en 1 2

Digital output

Analog output

Night mode

3D Sound

Dolby Surround

Stereo

– Night Mode

Optimizes the dynamics of the sound for low volume

playback.

– Karaoke vocal

Put this setting to On only when a multi-channel karaoke

DVD is being played. The karaoke channels on the disc will

then be mixed into a normal stereo sound.

– Subwoofer cut-off

The frequency of the subwoofer output can be set to

HIGH (200Hz) or LOW (100Hz) to match your system’s

playback sound quality.

- PCM Output

Allows to select PCM digital output between 48kHz and

96kHz. Some 96kHz DVD discs are copyright protected. If

your selection is 96kHz, the digital output is muted to

comply the standards. Please select 48kHz to enable the

output.

Language

Select the required Menu, Audio and Subtitle language. See

‘Initial Setup’.

Audio language and Subtitle language can also be adapted

via the Menu bar on the screen.

Features

– Access Control

Access Control contains the following features:

Child Lock - When Child Lock is set to On, a 4-digit code

needs to be entered in order to playback discs.

Parental control - Allows the conditional presentation of

DVDs containing Parental Control information (see ‘Access

Control’).

– Status Window

Displays the current status of the player and appears with

the menu bar. When disc playback is stopped, it is displayed

with the ‘Temporary Feedback Field’ in the default screen.

See ‘On-Screen Display’ information;

Factory setting is On. Select Off to suppress display of the

Status Window.

– Low Power Standby

This setting is effective for Europe and U.K. models, when

the DVD player is connected between your TV and VCR

with SCART cables. If you use TV and VCR while the DVD

player is turned off, set Low Power Standby to Off

Otherwise VCR does not function.

– PBC

Some Video CDs have PBC(Playback control). When

activated, a menu screen included on the disc appears soon

after playback starts.

– Help text

When set to On, help text describes the icons selected.

Select Off if you no longer require the help text.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha dvd s 520 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha dvd s 520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info