Bedienungsanleitung Yamaha dvd s2500 (Seite 16 von 35) (Englisch)

136993

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

On-screen menu

The On-screen menu enables you to customize this unit

to suit your requirements.

1 Press ON SCREEN on the remote control.

➜ The On-screen menu appears on the screen.

2 Press k n l h to navigate the On-screen menu and to

change the settings.

3 Press ON SCREEN to exit from the On-screen menu.

Features

Dimmer

Adjusts the brightness of the front panel display.

You can use this function if the brightness of the front

panel display disturbs your enjoyment of the home

theater.

Choices: Low, Medium, Normal

Initial setting: Normal

Wake up timer

Turns on the player from standby mode after a preset

amount of time. The timer is then reset to zero. You can

set the timer for up to 600 minutes.

Choices: 0 to 600 minutes

Initial setting: 0

Status window

Displays the current status of the player. Select [Off] to

suppress display of the Status window.

Choices: On, Off

Initial setting: On

Adv.Picture

Allows you to fine-tune the following video parameters.

4:3 Aspect

You can adjust the aspect ratio of the projected images

on the screen. This function is only available for

progressive scan and HDMI video output.

Select [NL_Stretch] for display of 4:3 image on the 16:9

screen with non-linear stretching (Center position of

screen is stretch less than the side).

Select [4:3 PillarBox] to display 4:3 image on the 16:9

screen without stretching.

No aspect ratio adjustment is made when [Auto] is

selected.

We recommend setting the aspect ratio on your TV if the

function is available.

Choices: 4:3 PillarBox, NL_Stretch, Auto

Initial setting: Auto

TrueLife

Produces more dynamic picture by increasing the

picture contrast and the color intensity. This function is

available for progressive scan output only.

Choices: 0 to +7

Initial setting: 0

DCDi

DCDi (Directional Correction Deinterlacing) computes

and tracks the angle of the screen edge to fill in the

missing pixel on the TV screen. DCDi will optimize the

image quality significantly, especially during the slow

motion playback. This function is available for

progressive scan output only.

Choices: On, Off

Initial setting: On

Chroma Delay

The chroma (color) and luminance (brightness) signals

are not synchronized. The Chroma Delay setting allows

you to adjust the advance delay of the chroma signal to

yield a perfectly clear picture. This function is available

for signals output from COMPONENT video jacks

only.

Choices: –3 to +3

Initial setting: 0

Gamma

Enables you to adjust the intensity of the picture non-

linearly. A positive value enables you to bring out low

level detail in dark scenes, while a negative value

emphasizes contrast. This function is available for

signals output from COMPONENT video jacks only.

Choices: –7 to +7

Initial setting: 0

General operation

Preferences

Toolbar

Setup

Toolbar

Program

View

Play Option

Slide Show

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha dvd s2500 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha dvd s2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info