557523
12
Zoom out
Zoom in
Vorherige Seite
1/364
Nächste Seite
8 En
Connections
If your AV receiver has video output jacks,
connect your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your receiver.
This unit has four types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
Component video jacks <A>
Component video connections achieve
high fidelity color reproduction than S-
video connections by transmitting video
signals on separate wires for luminance (Y:
green) and chrominance (P
B: blue, PR: red).
Connect VIDEO OUT - COMPONENT
(Y, P
B/CB, PR/CR) jacks of this unit to
component input jacks of your AV receiver
and then to those of your TV using a
commercially available component cable.
Observe the color of each jack when you
make connections.
If your receiver does not have component
output jacks, you can achieve a better
video image by connecting the component
output jacks of this unit directly to the
component input jacks of your TV.
Note:
You need to set “COMPONENT” to “YUV”
(see “Switching the YUV/RGB” on
page 28).
S-video jack <B>
S-video connections achieve a clearer
picture than composite video connections
by transmitting video signals on separate
wires for luminance (Y) and chrominance
(C).
Connect VIDEO OUT - S VIDEO jack of
this unit to S-video input jack of your AV
receiver and then to that of your TV using
a commercially available S-video cable.
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this
unit to video input jack of your AV
receiver and then to that of your TV using
the supplied video pin cable.
SCART terminal <D>
If your TV has only a terminal for video
input, you can connect the TV directly to
this unit.
Connect AV terminal of this unit to
SCART input terminal of your TV using a
commercially available SCART cable.
Note:
Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to
this unit.
Video connections
VIDEO
OUT
VIDEO
IN
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
S VIDEO
OUT
S VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
INPUT
<D><C><B><A>
YPB/CBPR/CR
PR
Y
PB
PR
Y
PB
S
V
AV receiver
Video pin cable
(supplied)
This unit
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha DVD-S559MK2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info