Bedienungsanleitung Yamaha EMX 512 (Seite 5 von 36) (Englisch)

484104

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

EMX512SC/EMX312SC/EMX212S

Thank you for your purchase of this Yamaha EMX512SC, EMX312SC, or EMX212S power mixer.

Please read through this manual carefully before beginning use, so that you will be able to take full

advantage of your mixer’s superlative features and enjoy trouble-free operation for years to come. After

reading the manual, please store it in a safe place.

■ Basic

Quick Guide 6

Before Turning On the Mixer........................................ 6

Getting Sound to the Speakers.................................... 7

Adding Some Reverb................................................. 11

Using the Compressors to Enhance Vocals .............. 12

Making the Most of Your Mixer 13

A Place for Everything and Everything in its Place .... 13

A Plethora of Connectors—What Goes Where? ... 13

Balanced, Unbalanced—What’s the Difference? .. 14

Signal Levels and the Decibel.................................... 15

Making Better Mixes................................................... 15

Approaching the Mix—Where Do You Start? ...... 15

To EQ or Not to EQ.............................................. 16

Ambience ............................................................. 17

The Modulation Effects: Phasing, Chorus,

and Flanging ........................................................ 18

Compression........................................................ 18

■ Reference

Controls and Connectors 20

Controls on Each Channel ......................................... 20

Digital Effects Section ................................................ 22

MAIN Section ............................................................. 23

MONITOR Section ..................................................... 24

POWER Section ........................................................ 25

Rear Panel ................................................................. 26

Connecting Speakers 27

Horizontal Orientation, Tilting and

Rack Mounting 28

Horizontal Orientation ................................................ 28

Tilting ......................................................................... 29

Rack Mounting ........................................................... 29

Setting Up 30

Troubleshooting 31

Specifications 32

Input Channels..................................... page 20

The EMX offers four monoaural mic/line input channels (1

to 4) and four stereo input channel pairs (5/6 to 11/12),

allowing you to freely mix inputs from microphones, line-

level devices, and stereo devices. For example, you can

mix four microphones with four stereo devices, or seven

microphones with one stereo synthesizer.

Phantom Power (+15V)........................ page 25

A single switch turns phantom power on to all mic inputs.

Use this feature to provide power to condenser microphones.

High-Quality Digital Effects ................ page 22

The mixer’s internal effector is in the same league as our

SPX effector series, allowing you to create a rich range of

variations with no external help. But of course you are also

free to use the EFFECT OUT jack to connect to an external

effector of your choice.

MAIN and MONITOR Outputs ............. page 23

The mixer offers excellent independent control of main and

monitor output. The top panel offers separate main and

monitor outputs, while the POWER AMP switch can be

used to set the SPEAKERS jacks so that they output either

the main signal to both speakers or else the main signal to

one speaker and the monitor signal to the other. Separate

MASTER control knobs and 7-segment graphic equalizers

are also provided.

Compressors (EMX512SC and

EMX312SC only) .................................. page 21

Compressors on channels 1 to 4 can be used to squeeze

the dynamic range of inputs such as microphones and

acoustic guitars, attenuating the higher levels and bringing

out the lower ones. This feature helps reduce distortion and

allows overall volume to be set higher, resulting in a stron-

ger and more impressive sound.

Tilt Setup or Rack Mount ................... page 29

The EMX can be positioned at an angle or mounted in a

rack, allowing for easy accessibility in a wide variety of set-

ups.

Internal Power Amp.............................page 25

The internal amp makes it possible to connect the SPEAK-

ERS jacks directly to non-powered speakers, with no need

for an external ampliﬁer in between. The rear panel offers

two types of speaker connectors: phone jacks and Neutrik

Speakon jacks.

Contents Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EMX 512 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info