Bedienungsanleitung Yamaha ES7 (Seite 24 von 300) (Englisch)

48742

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Rear Panel

24 Owner’s Manual

The Controls & Connectors

1POWER Switch Page 43

Press to turn power ON or OFF.

2AC INLET (AC Power Cord Socket) Page 26

Be sure to plug the AC power cord into this socket before

plugging the power cord into an AC outlet.

Use only the AC power cord supplied with this instrument.

If the supplied cord is lost or damaged and needs to be

replaced, contact your Yamaha dealer.

The use of an inappropriate replacement can pose a ﬁre

and shock hazard!

3mLAN expansion board (mLAN16E) or I/O

expansion board (AIEB2) cover Page 25

Either the mLAN expansion board (mLAN16E) or the I/O

expansion board (AIEB2) sold separately can be installed

to this instrument. With the mLAN16E board, you can

conveniently and easily hook up your MOTIF ES to other

mLAN compatible instruments or devices.

The AIEB2 board gives you additional digital I/O options,

featuring both optical and coaxial connectors. Moreover,

the board also includes three stereo ASSIGNABLE

OUTPUT pairs (six analog jacks).

4USB connectors Page 29

This instrument is equipped with two types of USB

connectors on the rear panel – USB TO HOST and USB

TO DEVICE. The USB TO HOST connector is used to

connect this instrument to the computer via the USB

cable. The USB connection between the instrument and

the computer can only be used for transfer of MIDI data.

No audio data can be transferred via USB. The USB TO

DEVICE connector is used to connect this instrument to a

USB storage device (hard disk drive, CD-ROM drive, MO

drive, ﬂash disk, etc.) via the USB cable. This lets you

save the data created on this instrument to the external

USB storage device and load the data from the external

USB storage device to the instrument. Save/Load

operations can be performed in the File mode.

nFor details about USB, see Page 29.

5MIDI IN/OUT/THRU connectors Page 34

MIDI IN is for receiving control or performance data from

another MIDI device, such as an external sequencer.

MIDI THRU is simply for redirecting any received MIDI

data (via MIDI IN) to connected devices, allowing

convenient chaining of additional MIDI instruments.

MIDI OUT is for transmitting all control, performance and

playback data from the MOTIF to another MIDI device,

such as an external sequencer.

6BREATH Controller Jack Page 42

Connect an optional Yamaha BC3 Breath Controller here

for expressive breath control capability.

7FOOT SWITCH jacks Page 42

For connection of optional FC4 or FC5 Footswitches.

When connected to the SUSTAIN jack, the Footswitch

controls sustain. When connected to ASSIGNABLE, it can

control one of various different assignable functions.

8FOOT CONTROLLER jacks Page 42

For connection of optional foot controllers (FC7, etc.).

Each jack lets you continuously control one of various

different assignable functions – such as volume, tone,

pitch, or other aspects of the sound.

9ASSIGNABLE OUT L and R jacks Page 31

Line level audio signals are output from this instrument via

these phone jacks (1/4" mono phone plug).

These outputs are independent of the main output (at the

L/MONO and R jacks below), and can be freely assigned

to any of the Drum Voice keys or the Parts. This lets you

route speciﬁc Voices or sounds for processing with a

favorite outboard effect unit.

The parts which can be assigned to these jacks are as

follows:

• Drum Voice key to which the drum/percussion

instrument is assigned Page 203

• Any part of a Performance* Page 218

• Any part of a Song* Page 235

• Any part of a Pattern* Page 235

* Including the Audio Input part

)OUTPUT L/MONO and R jacks Page 31

Line level audio signals are output via these phone jacks.

For monophonic output, use just the L/MONO jack.

!PHONES jack Page 31

For connection to a pair of stereo headphones.

@A/D INPUT jacks Page 33

External audio signals can be input via these phone jacks

(1/4" mono phone plug).

Various devices such as microphone, guitar, bass, CD

player, synthesizer can be connected to these jacks and

their audio input signal can be sounded as the AUDIO IN

part of the Performance, Song, or Pattern.

In the Sampling mode, these jacks are used for capturing

audio data as samples. For stereo signals (such as from

audio equipment), use both jacks. For mono signals

(such as from a microphone or guitar), use only the L jack.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial

interface for connecting a computer with peripheral devices,

and enables much faster data transfer compared to

conventional serial port connections.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ES7 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info