Bedienungsanleitung Yamaha ES7 (Seite 31 von 300) (Englisch)

48742

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Setting Up

Connections

Owner’s Manual

Connections

Connecting to External Audio Equipment

Since the MOTIF ES has no built-in speakers, you’ll need an external audio system or a set of stereo headphones to properly

monitor it. The following illustrations show various connection examples; use the one most similar to your intended setup.

Audio Output

■ Connecting stereo powered speakers (analog output)

For optimum, accurate reproduction of the instrument’s rich sounds, effects and full stereo image, use a pair of powered

speakers. Connect the powered speakers to the OUTPUT L/MONO and R jacks on the rear panel.

nWhen using just one powered speaker, connect it to the OUTPUT L/MONO jack on the rear panel.

■ Connecting a mixer

There are extra audio outputs in addition to the OUTPUT (L/MONO and R) jacks. Connect these outputs to a mixer for separately

controlling the analog outputs of Drum keys or parts (Performance, Song, and Pattern). You can expand the output capabilities

by installing the optional I/O board (AIEB2) or the optional mLAN16E. Installing the AIEB2 adds six extra OUTPUT jacks, while

installing the mLAN16E expands the output capabilities with fourteen addition digital outputs, over a single FireWire (IEEE 1394)

connector/cable. For details on how to set the Part/output jack assignments, refer to the chart below.

Outputting separate notes

(keys) of a Drum Voice Determined from the OutputSel parameter (as selected below) as Drum Voice data. Page 203

[VOICE] ➞ Drum Voice selection ➞ [EDIT] ➞ Drum Key selection ➞ [F1] OSC ➞ [SF2] OUTPUT ➞ OutputSel

This setting is available for the Part for which the OutputSel parameter is set to “drum” in another mode

(e.g., Performance or Song).

Outputting separate Parts

of a Performance Determined from the OutputSel parameter (as selected below). Page 218

[PERFORM] ➞ Performance selection ➞ [EDIT] ➞ Part selection ➞ [F2] OUTPUT ➞ [SF3] SELECT ➞ OutputSel

Assigning an audio input Part of a Performance to an output is done from the OutputSel parameter (as selected

below).

[PERFORM] ➞ Performance selection ➞ [EDIT] ➞ [COMMON] ➞ [F5] AUDIO IN ➞ [SF1] OUTPUT ➞ OutputSel

Outputting separate Parts

of a Song Determined from the OutputSel parameter (as selected below). Page 235

[SONG] ➞ Song selection ➞ [MIXING] ➞ [EDIT] ➞ Part selection ➞ [F2] OUTPUT ➞ [SF3] SELECT ➞ OutputSel

Assigning an audio input Part of a Song to an output is done from the OutputSel parameter (as selected below).

[SONG] ➞ Song selection ➞ [MIXING] ➞ [EDIT] ➞ [COMMON] ➞ [F5] AUDIO IN ➞ [SF1] OUTPUT ➞ OutputSel

Outputting separate Parts

of a Pattern Determined from the OutputSel parameter (as selected below). Page 235

[PATTERN] ➞ Pattern selection ➞ [MIXING] ➞ [EDIT] ➞ Part selection ➞ [F2] OUTPUT ➞ [SF3] SELECT ➞

OutputSel

Assigning an audio input Part of a Pattern to an output is done from the OutputSel parameter (as selected below).

[PATTERN] ➞ Pattern selection ➞ [MIXING] ➞ [EDIT] ➞ [COMMON] ➞ [F5] AUDIO IN ➞ [SF1] OUTPUT ➞ OutputSel

MUSIC PRODUCTION SYNTHESIZER

MOTIF ES

OUTPUT L/MONO OUTPUT R

PHONES

Powered speaker (Left) Powered speaker (Right)

Headphones

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ES7 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info