Bedienungsanleitung Yamaha EX5 (Seite 221 von 304) (Englisch)

48736

221

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

221

Pattern Mode

Steps for Setting the Play Effects

1 Start pattern playback.

Press [PLAY] key for pattern playback to begin.

Play Effects can be set when the pattern is

stopped, and also can be set in real time when

the pattern is playing back. This lets you check

the effect that results from the Play Effects.

2 Select [F5] ALL or [F6] TR.

When you want to apply the same Play Effects to

all tracks, press [F5] to select ALL(All tracks). On

the other hand, when you want to set the Play

Effects differently for each track individually,

press [F6] to select TR(each track).

3 Select the track to which you want to apply

the Play Effects.

When you select TR (each track) in step 2

above, select a track from the eight tracks, Tr 1-8.

This step is unnecessary when you select ALL

(All Tracks) in step 2 above.

4 Set the length of the loop.

Move the cursor to Length (measure/beat/clock),

and set the length of the playback loop (a set

phrase is repeated). The length set here

determines the pattern playback loop.

5 Select a groove template.

Move the cursor to Type and select a groove

template. When a User groove template is

selected, continue by moving the cursor to Val

(Value), and select a Quantize value.

When a template is selected from the 1~100

Preset groove templates, the Quantize value can

be confirmed, but not changed.

F5 F6

6 Set other parameters.

Set other parameters as necessary.

7 Set the Play Effects for other tracks.

Repeat the above steps 3~6 and set the Play

Effects settings for the necessary tracks.

These parameters are the same as those explained for

the PFX screen in Song Play mode. Therefore, only the

parameters that differ will be explained. For

information on the parameters, see page 187.

The parameters that are not in the PFX screen of the

Song Play mode, are added to the bottom of the PFX

screen of the Pattern Play mode.

■ Length (Loop Length)

Sets and displays the loop length

(measure/beat/clock) for each track. Here you can

set the length of each track to determine the length

of each loop that is played back. You can change the

loop length for each track and therefore for example,

as shown in the next diagram, a one measure bass

line loop can have one Play Effects settings, while

the four measure rhythm loop can have different

Play Effects settings. Through combining the two,

you can play even more complicated grooves.

Before recording the pattern, set the length for each

track here.

■ Measure Number

Displays and sets the currently selected track

measure number.

❏ Settings: 1~16

■ Beat Number

Displays and sets the currently selected track beat

number. Available settings will differ depending on

the current time signature.

❏ Settings: 1~8

Track 1: rhythm

Track 2: bass line

Four measure loop

One measure loop

Pattern/E/qx 5/21/98 11:43 AM Page 221

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 221

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info