Bedienungsanleitung Yamaha EX5 (Seite 233 von 304) (Englisch)

48736

233

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

Pattern Mode

233

■ Events

Sets the type of event that will be reduced. When

“Control Change” is selected, a setting parameter

will be added, and the control number can be

designated there.

❏ Settings: Pitch Bend, Control Change (Control numbers

range from 000~127), Ch After Touch (Channel

After Touch), PolyAfter Touch (Polyphonic

After Touch)

6. Extract

This job moves all instances of specific data from a

designated range of a sequence track to the same range

on a different sequence track. Following the operation,

the targeted events no longer exist in the source track.

If data already existed at the destination, the extracted

data and existing data are mixed.

You can also use this job to delete the specified event

data rather than move it. You can do this by setting the

extract destination track to “off.”

■ Track

Selects the track that will be extracted from (Extract

source) and the track that will be copied to (Extract

destination).

❏ Settings:

Extract source: 1~8

Extract destination: 1~8, off (extracted data is deleted)

■ Measure

Sets the measure range (the beginning measure and

the end measure) where Extract is executed.

❏ Settings: 01~16 (for the beginning measure and the end

measure)

■ Events

Sets the type of event that will be extracted.

When an event other than "Sys. Exclusive" is

selected, additional parameters for the event range

will be added, and you can designate the range.

❏ Settings: Note, Program Change, Pitch Bend, Control

Change, Ch After Touch (Channel After Touch) ,

PolyAfterTouch (Polyphonic After Touch),

Sys.Exclusive(System Exclusive)

■ Event Range

Sets the range you want to extract the event. The

unit of the value differs depending on the selected

event.

❏ Note: C–2~G8

❏Program Change, Control Change (Control number),

Ch After Touch, PolyAfterTouch: 0~127

❏ Pitch Bend: –8192~+8192

7. Chord Sort

This job “sorts” chordal note events (simultaneous

note events) by order of pitch. The notes can be either

sorted from the highest pitch to the lowest or from the

lowest pitch to the highest. The chords within the

designated range of the specified sequence track can be

sorted. For example, if notes E3, C3, and G3 all begin at

the same time, the job arranges the order to C3, E3, G3

(if set to “up order”) to G3, E3, C3 (if set to “down

order”).

■ Track

Sets the track where Chord Sort will be executed.

❏ Settings: 1~8

■ Measure

Sets the measure range (beginning measure to the

end measure) where Chord Sort is executed.

❏ Settings: 01~16 (for the beginning measure and the end

measure)

■ Type

Sets the type of Chord Sort. When “up order” is

selected, chords are sorted from the lowest pitch to

the highest, while selecting “down order” will sort

from the highest pitch to the lowest.

❏ Settings: up order, down order

Pattern/E/qx 5/21/98 11:44 AM Page 233

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 233

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info