Bedienungsanleitung Yamaha EX5 (Seite 263 von 304) (Englisch)

48736

263

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

Disk Mode

263

6 Press [ENTER].

The following pop-up menu will appear, prompting

confirmation of the operation.

7 Press [YES] (INC) to execute the operation.

Press [NO] to cancel the job.

When the operation is being executed, “Executing...”

will be displayed . When the operation is completed

“Complete!” will be momentarily displayed.

8 When you have completed operations, press EXIT

(the number of times will vary) to exit the Disk

mode.

You can also exit the Disk mode by pressing another

Mode key.

[F1]: SAVE (File Save)

This operation saves the file you have created to the

disk.

To save data to floppy disk, it is first necessary to format

(initialize) the disk (page 269).

To name a newly saved file, press [F7]: NAME to

display the Name screen, and you can name the file (a

maximum of eight characters). For information on how

to name files, see below.

To write over already existing file names, it is

convenient to press [F8]: DIR and display the Directory

screen.

Pressing [F2] or [F3] key will display the disk files (on

the screen) in the order they were saved or in the

alphabetical order. You can search the file you need

quickly using these functions.

For information on the selectable types of data, see page

260.

When the size of the file is larger than the available space

on the floppy disk, “Disk Full” message will be displayed .

In this case, you can either delete unnecessary files to

create more available memory on the floppy disk, or start

the save operation once more with a different disk.

When you try to save a file which file name already

exists,” Overwrite? Are you sure?” confirmation message

will be displayed.

Take note that mistaken operations will erase

important data from your disk permanently.

Setting a File Name

1 Press [F7] and the NAME screen will be displayed.

2 Use [INC]/[DEC] or Data Dial to select a number,

letter, or symbol.

3 Move the cursor and select the next character.

4 Repeat the above steps 2 and 3 to set the song

file name.

You can also enter numbers, letters, or symbols

using the numeric keypad. Several letters or symbols

are assigned to each key (available letters or symbols

are printed below each key). For example, each time

the 0 key is pressed, the available number and

letters are displayed in the following order:

0→A→B→C. SPACE (one space) is assigned to

[ENTER] key. You can also move through the input

locations (numbers, letters, and symbols) using the

cursor key.

Available numbers and letters:

Shown in the above illustration.

Lower case letters are not available. Setting a name

is based on MS-DOS specifications. If you use a

letter that is not included in MS-DOS, “_”

(underline bar) is automatically located in place of

the unrecognizable letter that was entered.

[F1]: ALL (All Data)

Saves all of the data in the internal memory as a single

file.

❏ Settings:

File number (destination)

Device name/directory (destination)

When there is only one directory layer, the disk

directory indication will not be displayed.

Device name/directory (destination)

File type (source)

File number/name (destination)

Disk/E/qx 5/21/98 11:53 AM Page 263

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 263

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info