Bedienungsanleitung Yamaha EX5 (Seite 269 von 304) (Englisch)

48736

269

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

Disk Mode

269

[F5]: MKDIR (Make Directory)

This operation creates a directory. It is possible to make

directory within a directory which is called a sub-

directory. This allows you to do systematic file

management.

Only a maximum of two layers of a sub-directory can be

made.

A directory can not be given a name that is identical to an

already existing directory name.

When there is only one directory layer, the disk directory

indication will not be displayed.

(If necessary, select a device beforehand) after selecting

a directory, press [F7]: NAME to show the Name

screen, and input the name of the sub-directory that

you will create. For more information on how to name

directories, see page 263.

Once you input a directory name, press [EXIT] to close

the Name screen and press [ENTER]. The

confirmation message “Make Directory: Are you sure?”

will be displayed. Press [INC/YES] to execute the Make

Directory function, or press [DEC/NO] to abort the

operation.

“DIR” displayed in a file name indicates that there is a

sub-directory. To access the sub-directory, move the cursor

to select the sub-directory name and press [ENTER]. The

file sub-directory will be displayed one line below the file

name that contained DIR. If you select the file name “up

dir” (up directory) that is within the sub-directory, and

press [ENTER], the screen will return to the previous

directory.

[F6]: FORM (Device Format)

This operation formats (initializes) the disk. It is

necessary to first format new floppy disks or external

SCSI devices such as hard disk, ZIP, and JAZ disk

drives before use.

For more information on external SCSI devices, see

“Devices That Can Be Used” (page 259).

Since the “TOOL” disk included in the ZIP/JAZ drives has

a special type of processing, the EX5/5R/7 cannot format

these disks. Therefore use a computer to format the disk

using the ZIP/JAZ included software. In general, the

EX5/5R/7 can format normal ZIP/JAZ disks. For more

information on ZIP/JAZ disks, refer to the owner’s

manual for the respective products.

Insert a new disk into the disk drive (when using an

external SCSI device confirm that it is connected

properly) and press [ENTER]. The LED below the

floppy disk drive slot will turn on (blink) and

formatting will begin. While formatting is taking place,

“Executing...” will be displayed.

If you re-format a disk that has already been

formatted and contains data, all of the data will be

erased. Be careful not to erase your important data.

Do not try to forcefully remove the disk from the

disk drive while formatting is taking place. This will

damage the disk drive.

Take proper precautions when more than one

external SCSI device are connected, so that you do

not format, or erase data on the wrong disk drive.

[F7]: DEV (Device Select)

This operation displays the disk contents on a floppy

disk and a connected external SCSI device. Device

name, disk name, amount of memory used and amount

of available memory are displayed.

Disk/E/qx 5/21/98 11:53 AM Page 269

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 269

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info