Bedienungsanleitung Yamaha EX5 (Seite 273 von 304) (Englisch)

48736

273

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

[F7]: FILT (Filter)

Sets whether or not a filter is applied (the signal is not

input/output) for each MIDI event.

The filter can be applied either when recording or

when playing back data. The filtered MIDI events will

not be recorded or played back.

The following list are MIDI events that can be filtered.

■ Filters

Sys Ex (System Exclusive)

Ch. AT (Channel After Touch)

PolyAT (Polyphonic After Touch)

Note

CtrlChng (Control Change)

Pgm Chng (Program Change)

P. Bend (Pitch Bend)

❏ Settings:

rec (record):

(not input/output)

(input/output)

play (playback):

(not input/output)

(input/output)

■ SysEX Interval (System Exclusive Interval)

When playing back the system exclusive data (bulk

data) that is recorded on the sequence tracks, this

sets the interval that is inserted for each 1KB.

When the bulk data is sent from the EX to the

external device, a MIDI error may occur because of

the inadequate capacity of the external device. This

setting sets an interval time that provides enough

time for the receiving device to process the bulk data.

❏ Settings: 0~900 (msec)

The playback may be a little slower depending on the

currently set interval. Also when a MIDI error occurs,

try to set the interval a little higher and send the data.

[F8]: SYNC

Sets settings related to synchronization between the

internal sequencer and external devices.

■ Event Chase

Event Chase allows during playback,fast forwarding,

or rewinding, for a designated event not to be

skipped. When Event Chase is set to a specific event,

even if you fast forward or rewind, the playback data

will be reproduced correctly.

❏ Settings: Tempo; Tempo, PC (Tempo, Program Change);

Tempo, PC, Ctrl (Tempo, Program Change,

Control Change); All (All events)

When Event Chase is set, even if a song or phrase is

played from a mid point (of the song or phrase), the

designated event will be detected and played back at a

high speed from the beginning of the song. For this

reason, it may take some time to start playback or the

fast forward/rewind may become slower.

When set to “ALL,” a large amount of MIDI data may

be output through MIDI OUT jack resulting in a MIDI

error for the external MIDI device.

■ Sync

When synchronizing a performance with an external

MIDI device, this parameter selects whether the

EX5/5R/7 uses own internal clock, or the MIDI

clock and MTC signals that are received at MIDI IN.

When set to “internal”, the EX uses the internal

clock. Select “internal” when using the EX alone,

and when using it as a master to control the timing

of external MIDI devices.

When set to “MIDI-A” (or “MIDI-B”), the EX will

be controlled by the MIDI clock signals that are

received at the MIDI IN(-A) jack (or MIDI-B jack).

Select “MIDI-A” (or “MIDI-B”) when the EX is used

as a slave (controlled by an external MIDI device).

When set to “MTC MIDI-A” (or “MTC MIDI-B”),

the EX sends MMC signals from the corresponding

MIDI OUT jack. (For “MTC MIDI-A,” the MIDI

OUT(-A) jack and for “MTC MIDI-B,” the MIDI

OUT-B jack). Select “MTC MIDI-A” (or “MTC

MIDI-B”) when the EX is used as a slave (controlled

by an external device such as a multi-track recorder

corresponding to the MMC standard).

273

Utility Mode

Utility/E/qx 5/21/98 11:54 AM Page 273

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 273

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info