Bedienungsanleitung Yamaha EX7 (Seite 274 von 304) (Englisch)

48738

274

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

Utility Mode

274

MTC (MIDI Time Code) is a Time Code that controls

the timing of multiple audio devices through MIDI

cables. The code is made up of “ hour, minute, second,

and frame.” The EX itself cannot output MTC and

therefore to play in sync using MTC it is necessary to

use a device such as the Yamaha MD4 that is capable of

outputting MTC.

MMC (MIDI Machine Control) is a standard used in

controlling devices such as a multi-track recorder using

a MIDI sequencer. This means that when the

operations such as start/stop, fast forward/rewind are

activated on a sequencer, the multi-track recorder (that

is receiving signals from the sequencer) will

automatically move according to the corresponding

operation. Therefore the multi-track recorder will keeps

the same location as that of the sequencer when played

back. This setting should be used when the EX is being

synced as a slave for performance, or when creating

music using an external device corresponding to the

MMC standard such as a multi-track recorder.

❏ Settings: internal, MIDI-A, MTC MIDI-A, MIDI-B, MTC

MIDI-B

“MIDI B” and “MTC MIDI-B” are available only with

the EX5.

■ MIDI Ctrl In (MIDI Control In)

Sets whether or not the MIDI clock signals (start,

stop, continue start, song position pointer) are

received.

❏ Settings: on (receive), off (not receive)

■ MIDI Ctrl Out (MIDI Control Out)

Sets whether or not the MIDI clock signals (start,

stop, continue start, song position pointer) are sent.

❏ Settings: on (send), off (not send)

■ MTC Start Offset (MTC Start Offset)

Sets the starting location for the internal sequencer

in the following units,”hour, minute, second, and

frame.” The internal sequencer will start at the

predetermined timing when the MTC is received.

❏ Settings: 0~23 for Hour, 0~59 for Minute and Second,

0~29 for Frame

[F4]: MIDI (MIDI Setup)

The MIDI Setup allows you to make settings related to

MIDI for the entire keyboard.

■ Global Recv Ch (Global Receive Channel)

Sets the MIDI receive channel for controlling the EX

with an external device such as a MIDI sequencer or

computer.

❏ Settings: 1~16, omn (omni: all channels)

■ MIDI Trns Ch

Sets which MIDI channel the operations on the

keyboard and/or controllers will be sent on.

❏ Settings: Ch1~Ch16

■ MIDI Echo Back

Outputs from MIDI OUT all data that is received at

MIDI IN(A).

❏ Settings: on (output), off (not output)

When an external MIDI device’s MIDI IN/OUT are

connected to the EX’s MIDI OUT/IN, this setting

should be set to “Off.”

In the case of EX5, this setting is effective only for the

MIDI IN-A.

■ Receive GM On

Sets whether or not the GM On is received. When

set to “enable,” GM On message can be received.

❏ Settings: disable (not receive GM On), enable (receive GM

On)

■ Receive Pgm Chng (Receive Program Change)

Sets whether or not the EX receives program change

messages from an external device. When “ignore

bank select” is selected, EX5/5R/7 receives the

program change message but ignores the bank select

message from an external device.

❏ Settings: on, ignore bank select, off (not receive)

When sequence data is loaded from an external device

or a floppy disk, this setting should be set to “on.”

Utility/E/qx 6/12/98 7:46 PM Page 274

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX7 Seite 274

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info