Bedienungsanleitung Yamaha F01 (Seite 33 von 78) (Englisch)

599450

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

ENGLISH

Selecting & Playing Voices

F11/F01 Owner’s Manual

3 Select a voice for the right hand.

Press a voice button.

4 Select a voice for the left hand.

Press the corresponding voice button while holding the [SPLIT] button. (The

indicator of the Left Voice button will light while the

[SPLIT] button is pressed.)

You can make the following settings for right and left voices in Split:

Split Balance

While holding down the [METRONOME] button, press one of the F

5-F

keys (see Quick Operation Guide). The current balance setting appears on the

display while both controls are held. A setting of “0” produces an equal balance

between the two Split mode voices. Settings below “0” increase the volume of

the left voice in relation to the right voice, and settings above “0” increase the

volume of the right voice in relation to the left voice.

Octave Shift

You can shift the pitch up and down in octave steps for the right voice and left

voice independently. You should make the setting depending on the note range

of the songs you play. While holding down the [METRONOME] button, press

one of the A4-D5 keys (see Quick Operation Guide). The current Octave Shift

setting appears on the display while both controls are held.

Left Voice Reverb Depth (F11)

While holding down the [METRONOME] button, press one of the F

1-F2 keys

(see Quick Operation Guide). The current Reverb Depth setting appears on the

display while both controls are held.

Damper Pedal Range

The Damper Pedal Range function determines whether the damper pedal

affects the right voice, the left voice, or both the left and right voices in Split

mode. While holding down the

[BGM] button, press one of the C0-D0 keys (see

Quick Operation Guide). The current range setting appears on the display while

both controls are held.

5 Exit Split mode.

Press the [SPLIT] button again so that its indicator goes out.

TIP

[VARIATION] in Split Mode

You can turn the variation on or

off for Split mode voices. Nor-

mally, the voice indicator of the

right voice lights in Split mode.

The [VARIATION] can be used

to turn the variation for the right

voice on or off as required.

While the [SPLIT] button is

held, however, the voice indica-

tor of the left voice lights. In this

state the [VARIATION] button

turns the variation for the left

voice on or off.

TIP

[REVERB] in Split Mode

The Reverb Type (page 35)

assigned to the right voice will

take priority over the other. (If

the reverb is set to OFF, the left

voice’s Reverb Type will be in

effect.)

TERMINOLOGY

Normal setting:

Balance will be decided accord-

ing to the balance default value

of the voice combination.

TERMINOLOGY

Normal setting:

Octave will be decided accord-

ing to the octave default value of

the voice combination.

TERMINOLOGY

Normal setting: F2

Left voice Reverb Depth will be

decided according to the left

voice Reverb Depth default

value of the voice.

TIP

The normal setting of Damper

pedal range is “for the right

Voice”.

Right Voice

A4 -1

Left Voice

C5 -1

40 C

B4 +1 D5 +1

C0 for the left Voice

0for both voices

D0 for the right Voice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha F01 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha F01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info