Bedienungsanleitung Yamaha F02 (Seite 13 von 52) (Englisch)

599464

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Setting Up

F02 Owner’s Manual

1. Connect the Power cord.

First insert the plug of the power cable into the AC

connector on the instrument, then plug the other

end of the cable into the proper AC outlet on the

wall. In some areas a plug adaptor may be provided

to match the pin configuration of the AC wall

outlets in your area. For more information on

connecting the power cord, refer to the assembly

instructions on page 43.

WARNING

• Make sure your instrument is rated for the AC voltage

supplied in the area in which it is to be used (voltage rating

appears on the name plate on the bottom panel). In some

areas, a voltage selector may be provided on the rear panel

of the main keyboard unit near the AC IN. Make sure that

the voltage selector is set for the voltage in your area.

Connecting the unit to the wrong AC supply can cause

serious damage to the internal circuitry and may even pose

a shock hazard!

• Use only the AC power cord supplied with your instrument.

If the supplied cord is lost or damaged and needs to be

replaced, contact your Yamaha dealer. The use of an

inappropriate replacement can pose a fire and shock

hazard!

• The type of AC power cord provided with your instrument

may be different depending on the country in which it is

purchased. (In some areas a plug adaptor may be provided

to match the pin configuration of the AC wall outlets in your

area.) Do NOT modify the plug provided with your

instrument. If the plug will not fit the outlet, have a proper

outlet installed by a qualified electrician.

2. Turn the power on.

Press the [ ] Power switch located on the right of

the keyboard to turn the power on.

The Power indicator located below the left end of

the keyboard lights up.

Power indicator

If you close the key cover without turning the power

off, the Power indicator remains lit, indicating that

the power is still on.

When you’re ready to turn off the power, press the Power

switch again.

The Power indicator turns off.

CAUTION

Even when the instrument is turned off, electricity is still

flowing to the instrument at the minimum level. When you

are not using the instrument for a long time or during

electrical storms, make sure you unplug the AC power plug

from the wall AC outlet.

Connect a pair of headphones (option) to one of the

[PHONES] jacks. Two [PHONES] jacks are provided. You

can connect two sets of standard stereo headphones. If

you are using only one pair of headphones, you can plug

them into either of these jacks.

CAUTION

Do not use headphones at a high volume for an extended

period of time. Doing so may cause hearing loss.

Turning the Power On

1-1

1-2

The shape of the plug and outlet

differ depending on locale.

Using Headphones

Power

indicator

Power switch

Standard

stereo

phone

plug

Bottom

surface

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha F02 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha F02

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info