31
Dubbing
•
During dubbing, adjusting the VOLUME control and using
the built-in sound field processor have no effect on the
recorded sound.
If, however, the built-in graphic equalizer is used, its effect
is recorded along with the source.
* Music with an equalizer effect is suitable for listening to
inside a car etc.
•
Try to use the same tape formula and length for the
recording tape as for the master tape.
1 Press the TAPE input selector button.
2 Load a prerecorded tape into the DECK A cassette
compartment. Insert a blank tape into the DECK B
cassette compartment.
3 Select the reverse mode “ ” to record on only one
side, or “ ” for
continuous recording on both sides by pressing the
reverse MODE selector button.
4 Press the DUBBING button.
* Press “NORMAL” to dub at normal speed, and “HIGH”
to dub at about twice the normal speed.
* Dubbing will begin from side A regardless of the side
now selected.
To stop dubbing
Press the stop button.
* Tape A and tape B will stop at the same time.
Note
Only tapes originally encoded with Dolby B or C NR will be
dubbed onto tapes with Dolby B or C NR encoding.
The setting of Dolby NR will have no effect on the recording
of tape B during dubbing.
However, the playback tonal quality of tape A will change
according to the selected Dolby NR position.
Erasing recorded tapes
11 Load the tape to be erased into the DECK B cassette
compartment.
22 Press the AUX 1 (or AUX 2) input selector button.
* Make sure that there is no sound output from the
external unit connected to the AUX 1 (or AUX 2)
terminals on the rear of this system.
33 Select the reverse mode “ ” to erase only one side or
“ ” to erase both sides
by pressing the reverse MODE selector button.
44 Press the REC/PAUSE button, then press the play
button to erase side A of the tape, or the play button to
erase side B.
OTHER RECORDINGS
1
3, 33
44
44
1, 22
44
2
4
2, 11
2222
