Bedienungsanleitung Yamaha GX900 (Seite 27 von 61) (Englisch)

29934

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

E-19

English

Tuning operation

1 Frequency display mode

The frequency of the station being received is displayed.

2 PS (Program Service name) mode

The name of the station being received is displayed using characters

selected from among 64 Roman Alphabets including umlaut sign.

* If other characters are used on the PS data, they are replaced by

underbars.

* “PS WAIT” may flash while the tuner is receiving the data.

* If the station does not employ the PS data service, “NO PS” lights up on

the display for about 2 seconds and then returns to the frequency display

mode.

3 PTY (Program Type) mode

The type of the program on the station being received is displayed. In this

mode, you can make this unit search for a station which is broadcasting a

program of your desired program type. For details, refer to the next page.

* If the RDS station does not employ the PTY data service, “NO PTY” lights

up on the display for about 2 seconds and then returns to the frequency

display mode. If the station has PS data, after that, it turns into the PS

mode.

4 RT (Radio Text) mode

Information about the program on the station being received is displayed.

Information is displayed by a maximum of 64 Roman Alphabets including

umlaut sign.

* If other characters are used on the RT data, they are replaced by

underbars.

“RT WAIT” may flash while the tuner is receiving the data.

* If the RDS station does not employ the RT data service, “NO RT” lights up

on the display for about 2 seconds and then returns to the frequency

display mode. If the station has PS data, after that, it turnsinto the PS

mode.

5 CT (Clock Time) mode

Current time is displayed in the following form. The CT data from the station

being received changes every minute.

The tuner corrects the time of the built-in clock by synchronizing it with the

CT data. (This function can also be canceled, if so desired. Refer to page 21

for details.)

* “CT WAIT” may flash while the tuner is receiving the data. If the data is

accidentally cut off, “CT WAIT” may flash and then turn into “NO CT”.

* If the RDS station does not employ the CT data service, “NO CT” lights up

on the display for about 2 seconds and then returns to the frequency

display mode. If the station has PS data, after that, it turnsinto the PS

mode.

Hour

Minute

Notes

● RDS data service cannot be used if the received signal is not strong enough. Especially, the RT (Radio Text mode) needs much

data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY, etc.) are displayed.

● There may be a case that RDS data reception is not possible due to poor reception conditions. In such a case, press

AUTO/MANUAL to make tuning manually. Though the reception mode is changed to monaural by this operation, when you

change the display to an RDS mode, RDS data may be displayed.

● If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut

off suddenly and turn into the frequency display mode.

1 Frequency

display mode

2 PS mode

3 PTY mode

5 CT mode

4 RT mode

FREQ PS/PTY/RT/CT

RANDOM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha GX900 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info